Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Advanced Topics

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01/09/2008, 12:00 PM
5speedT 5speedT is offline
Registered Member
 
Join Date: Dec 2007
Location: In the REEF
Posts: 18
Experience with GREAT STUFF FOAM

Anyone have experience with GREAT STUFF FOAM for the back of the tank? Im looking to do this to my 72 gallon bow but I have heard of people having a hard time to get it to stick properly?? Anyone have this done and want to comment on how you made it work? thanks.
  #2  
Old 01/09/2008, 02:13 PM
JaredWaites JaredWaites is offline
Premium Member
 
Join Date: Sep 2007
Location: Destin, FL
Posts: 651
Try searching the DIY forum.

But I do remember how they did it. They epoxy or silicone egg crate to the back of the tank. Then they use the foam to build up.
__________________
Knowing something is having first hand experience - Me

Having a high post count doesn't necessarily show intelligence or knowledge, it simply shows you just talk a lot. - Me
  #3  
Old 01/09/2008, 11:28 PM
o.c.d. o.c.d. is offline
Registered Member
 
Join Date: May 2007
Location: Calgary Alb. Canada
Posts: 292
Yes I read a article about using it on the bottom of a tank and buddy use ] shaped plastic cutouts and silicone them to the bottom so the foam wouldn't lift
  #4  
Old 01/10/2008, 09:43 AM
5speedT 5speedT is offline
Registered Member
 
Join Date: Dec 2007
Location: In the REEF
Posts: 18
Im worried about it rotting over time or absorbing water.
  #5  
Old 01/10/2008, 07:56 PM
o.c.d. o.c.d. is offline
Registered Member
 
Join Date: May 2007
Location: Calgary Alb. Canada
Posts: 292
Daniel Knopp is the one who wrote the article, and says some Polyurethane Foam (PU) as long as they are the nontoxic PU. The anchor used is H shaped not [ shape and glued with special cement.Also he tinted to PU to be stone gray (not from spray can) then formed by hand.It is saltwater resistant and doesn't need to be rinsed or soaked. Looks Cool , Doesn't say anthing about rotting
  #6  
Old 01/10/2008, 08:47 PM
mflamb mflamb is offline
Patient Reefer
 
Join Date: Jun 2006
Location: Seffner Florida
Posts: 4,091
I used pond foam on my 390 after seeing it on a couple of other tanks. I like it. Just remember...it doesn't stick to glass. It does stick to acrylic.
__________________
Click on my red house to see my 390 build thread.
  #7  
Old 01/10/2008, 09:33 PM
FishTri FishTri is offline
Registered Member
 
Join Date: Apr 2002
Location: Delaware County, PA
Posts: 335
I cut strips of eggcrate, foamed them, dropped shells in for texture, and glued the eggcrate strips to the glass and plastic overflows with a tube of silicon. Then I filled in the gaps between the glued up strips with more foam straight from the can.





The finished tank looks great (one day I'll do a build thread...) The only thing I might do differently is to use a darker foam.

One hint: when you fill in the gaps after the strips are glued up, its hard to control the amount of foam, and it expands between the seams, so you get a raised seam. Go slow, put in less than you think you need. If it expands too much, after about twenty minutes it forms enough of a skin that you can pat it down with your hand and work it flush with the strips.

Suggestion: practice on some scrap first. If I remember, I was able to use the can over a twelve hour period without it totally clogging up, although I tried to lay out enough work that I would use an entire can in one session.

Good luck!
__________________
...be right there, Honey...

Delaware Valley Reef Club (DVRC)
  #8  
Old 01/11/2008, 09:10 AM
5speedT 5speedT is offline
Registered Member
 
Join Date: Dec 2007
Location: In the REEF
Posts: 18
ok thanks! I guess im gonna give this a go. Did you use any sealer on the foam or did you just put the sand right on it while it was drying? I hear you have to seal the foam with epoxy or something. Looks good.
  #9  
Old 01/11/2008, 11:18 AM
FishTri FishTri is offline
Registered Member
 
Join Date: Apr 2002
Location: Delaware County, PA
Posts: 335
Never heard of the epoxy sealing; you might want to look into that a little more, in that it could help over the very long term to protect from UV and the foam getting brittle and breaking down. I've seen this discussed as a possibility, but I have never seen a post with anyone who experienced the foam failing over time, so I just did it.

First I cut strips of eggcrate to the contour of the back of the tank and the overflows. Cut them undersized (not as wide) because the foam will expand beyond the edges.

Lay them on a flat surface, with wax paper underneath. The wax paper was great! Stuff peels right off.

Apply the great stuff. I used short (3"-6") strokes on a diagonal starting from the top left of each panel, working back and forth, so that the diagonals ran rising from the left edge up towards the right side. Don't worry about filing in the little squares - the foam will work its way down. Smooth even strokes - like spray painting. Control the width of the foam with the speed of your stroke. It expands like crazy, so I tried to keep moving at a good clip to get the most coverage.

I sorted my shells into different sizes:

Large - A couple minutes after I sprayed the foam I stuck these in on edge to create a shelf. Getting them to stay vertical was a challenge, 'cause they wanted to lay over. A little extra foam on the underside helped.

Medium - after the little shelves were in I "artistically' placed some of the medium shells.

Small/Tiny - then I sprinkled the tiny shells and fragments across the entire surface.

Let everything cure for 12-24 hours. Especially where it went on thick.

Then flip the panels over. I used a blade out of a carton cutter to scrape off the foam that had gone all of the way through. This gave me a perfectly flat back to glue to the glass and overflows.

After the strips are glued up to the back of the tank you can spray foam between the gaps. If it expands too much, pat it down with your hand after a skin has formed. You can work it this way fifteen or twenty minutes after you spray it, and for another hour or so as it cures. Gives you nice flat seams the same height as the pre-made panel on either side.

SPRINKLE some of the Small/Tiny shells on the seams. Just throw it at the seam and it will stick. Otherwise you'll end up with clean seams (no shells) that will look obvious.
__________________
...be right there, Honey...

Delaware Valley Reef Club (DVRC)
  #10  
Old 01/11/2008, 12:20 PM
5speedT 5speedT is offline
Registered Member
 
Join Date: Dec 2007
Location: In the REEF
Posts: 18
thanks alot for your reply. Im gonna use your method of the eggcrate and stick the eggcrate to the back of the tank...now to find some eggcrate..lol
  #11  
Old 01/11/2008, 12:50 PM
FishTri FishTri is offline
Registered Member
 
Join Date: Apr 2002
Location: Delaware County, PA
Posts: 335
Home Depot, Lowes, etc. I did my 210 AGA tank with two sheets of 2'x4' eggcrate.
__________________
...be right there, Honey...

Delaware Valley Reef Club (DVRC)
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009