|
|
|
|
#1
06/03/2007, 10:34 PM
|
|||
|
|||
|
Can I use weld on 16
I am building a small fuge but all I have is no 16.(the no 4 evaporated or something)Will this work?
__________________
I could quit if I wanted to. |
|
#2
06/04/2007, 02:17 AM
|
|||
|
|||
|
No 16 is the thick- gap filling stuff. It potentially will work, but will not be as good as using number 3 or 4. Number 16 is also meant as an adhesive instead of a solvent. Number 3 or 4 will last longer and overall be a better solution. You should be able to find some for under $8. I just called a local plastics dealer.
__________________
What if the hokey pokey is what it's all about? |
|
#3
06/04/2007, 07:48 PM
|
|||
|
|||
|
Can you.. Yes, would I, No. With 16 you do not get as good of a bond and it is a lot harder to get a waterproof seal. If this fuge is intank or insump you should be ok. If it is outside of tank I would highly suggest geting some good solvent or use the two part WD40/42.
Kim
__________________
America will only be the Land of the Free as long as it is the Home of the Brave. |
|
#4
06/04/2007, 08:29 PM
|
|||
|
|||
|
Ok thanks guys.
__________________
I could quit if I wanted to. |
|
|
Linear Mode
