|
|
|
|
#1
06/15/2007, 10:36 AM
|
|||
|
|||
|
gluing acrylic to wood
Any recommendations on a good glue to attach acrylic to pine? I'm putting together a splash guard for my lights. There are of course other ways I could do this if gluing these two materials is not viable, but I was curious.
__________________
All opinions in the above message should be taken with 35 ppt salt. -Mike C. |
|
#2
06/15/2007, 12:36 PM
|
|||
|
|||
|
Weld-On #810 would work, but it's not cheap when you could just drill and screw it with a couple of stainless screws.
kc |
|
#3
06/15/2007, 11:24 PM
|
|||
|
|||
|
Screws. . .novel idea! I think we have a winner there. That would also make it easy if I wanted to change out just the wood or acrylic. . .it's always the obvious things that elude me. Thanks.
__________________
All opinions in the above message should be taken with 35 ppt salt. -Mike C. |
|
#4
06/16/2007, 01:44 AM
|
|||
|
|||
|
Or router a notch around the outer edge so the guard can just be slid into place
|
|
|
Linear Mode
