|
#1
|
|||
|
|||
MJ120 and Loc-Line
Was wondering if anyone had ever hooked up a Loc-Line to a MJ1200 output in their tank.
I have a 46g bowfront with the MJ1200 powerhead in it, that I would like to put a Y on and split the flow. Anyone seen or done this. Or know of a way to accomplish this without buying a lot of new equipment. Thanks in advance. Have a great day. |
#2
|
|||
|
|||
I have used MJ1200's with Phosban reactors and to feed fuges, and my auto top off by just putting clear tubing on the output from the pump. I am sure you could hook loc-line to it as well.
__________________
pretty big....not that evil...... |
#3
|
|||
|
|||
Yeah the clear tubing goes right on it. Don't know the size though...maybe 1/2 inch.
|
#4
|
|||
|
|||
Quote:
yep 1/2" tubing
__________________
Mike Sandbeds operate like wormholes and the excess nutrients and detritus are transported to a sister galaxy - Bomber 12-7-41 & 9-11-01 Never Forget! |
#5
|
|||
|
|||
Justy to clarify, 1/2 inch tubing on the MJ1200 outlet and on the inside of the Loc-Line Y-splitter?
|
#6
|
|||
|
|||
I am not sure what size the tubing is exactly but I have tons of it if you want a piece.
__________________
pretty big....not that evil...... |
#7
|
|||
|
|||
Quote:
|
#8
|
|||
|
|||
I would think 1/2 vinyl tubing on the MJ and then a 1/2" to barb nylon fitting to connect the vinyl to a 1/2" FPT loc-line adaptor. I can't think of any standard fittings that would give you a rigid connector between the loc-line and the powerhead.
|
|
|