|
#1
|
|||
|
|||
broken center brace
I was reaquascaping my 72 aga bf and broke my center brace . local LFS ordered me a new top trim but for now a have clamp holding it from bowing out to much. I plan on draining the tank down to about 6 inchs of water when changing the trim any good tips on how to get the old trim off whitout damaging the tank. thanks
|
#2
|
|||
|
|||
Use a dremel to cut around the corner edge of the brace all the way around the tank. Then carefully cut a section of it out witth the dremel and you should be able to get underneath the brace with a putty knife and carefully peal the brace away. Take your time with the dremel and don't touch the glass.
|
#3
|
|||
|
|||
I believe the bracing is held on to the glass with a bed of silicon.
|
#4
|
|||
|
|||
check this out
http://archive.reefcentral.com/forum...hreadid=640357
__________________
I never drink water because of the disgusting things that fish do in it. - WC. Fields |
#5
|
|||
|
|||
thanks for the tips it gave me just enough of an idea on how to go about this . I may just try and put in a temp, I have lots of acrylic in the garage. happy reefing
__________________
I may not agree with what you have to say,but i will fight to death your right to say it. |
|
|