|
#1
|
|||
|
|||
Xenia mounting
I have a small Xenia frag that I want to attach to some LR. Is it ok to glue it, or are there better ways? Right now I am letting it recover from the trip and it seems to be doing ok. Its so small I am worried that it will be difficult to glue.
__________________
Check out my reef tank upgrade project by clicking on the red house. |
#2
|
|||
|
|||
if you let it rest on some rubble in a protected area of the tank they attach themselves.i have the best mortality with this method.some people glue,i think losses are high IMO
|
#3
|
|||
|
|||
IMO, you will have a hard time gluing a xenia frag. They get too slimy. I have had the best luck using a toothpick. I literally stab the xenia from the head all the way thru the stock & then stick the end of the toothpick into a small hole in the LR rubble. In about a weeks time, the xenia has attached to the LR and the toothpick can be removed.
Using the above method, I had problems with the xenia sliding up the toothpick, thus causing the base to come off the LR. To counter this, I wrap a small rubber band around the top of the toothpick & push it down to the head of the xenia so there's no room for it to slide. Using this method, I can successfully frag xenia. Speaking of which, I need to frag my xenia....but I also need to get rid of some of the xenia frags I have already! These things grow way too fast. hth, rob |
#4
|
|||
|
|||
right now its in a breeder net thing with a small piece of LR, it hangs about 5" below the surface of the water. I was hoping that it would eventually attach to it.
__________________
Check out my reef tank upgrade project by clicking on the red house. |
#5
|
|||
|
|||
Here it is in the middle of three small pieces of LR. How long will it take for it to attach? It doesnt look great now as I was moving it around a bit to try some options out. Anyway here is a pic, I plan to leave it alone for a while if needed.
__________________
Check out my reef tank upgrade project by clicking on the red house. |
#6
|
|||
|
|||
it takes a couple of days when conditions are perfect.2 weeks at the most.IMO
|
#7
|
|||
|
|||
It looks like it has attached tonight, if all goes well in the morning I will move it out of the breeder net.
__________________
Check out my reef tank upgrade project by clicking on the red house. |
#8
|
|||
|
|||
if it attached give it a couple of extra days because sometimes when you move them too early they release.patience will save you a loss.
|
#9
|
|||
|
|||
needle and thread it works every time!!
|
#10
|
|||
|
|||
I use rubberbands untill they attach.. making lil frags of xeina very easy rubber band for like 3 days and boom your done....
|
|
|