|
#1
|
|||
|
|||
Custom 29 Sump
Hey guys, I am planning on building my sump out of a standard 29g glass perfecto, which measures:
30x12x18. I want to model it like the 20g long from melev's site. Skimmer/refugium/return. The skimmer will be the Tunze 9010, which is tiny and only needs about 5x5, and the return pump will most likely be the ehiem 1260. I am going to get the baffles cut once I find a place to do it. Will they cut teeth into the baffle for the fuge for me? Looking for comments on my idea. Im thinking this will cost me around $140 or maybe less. I was looking at the ADHI 30 refugium, although very nice it costs over $325 I have never attempted anything like this, so any thoughts, comments, or ideas/advice please!!! Dave Oh yea, its for a 70g Oceanic Tech Tank. |
#2
|
|||
|
|||
i used a 29g for my sump for my 90g. I have pictures of it in my build thread, red house. I used a skimmer with a larger footprint than yours though, so you'll be able to have a much bigger fuge. There's really no need to cut teeth into baffles, i used a piece of eggcrate on top of the baffle to keep my chaeto from going into the return section.
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#3
|
|||
|
|||
I remember following your thread. Awesome tank. I will go back and check the fuge.
Any other comments? |
Thread Tools | Search this Thread |
Display Modes | |
|
|