|
#1
|
|||
|
|||
recirc mod
i have a sedra 3500 NW and a CSS 65 lying around
could i hook the sedra up in recirc mode to the css body? if i can what size uniseals should i used and what size pvc is needed to connect it?
__________________
75g begginer reef |
#2
|
|||
|
|||
you can, the sedra's input is 1" and the output is 1/2.. it'd be a good idea to put the outlet and inlet on unions so you can take the pump off if needed, and don't forget a venturi.
check out www.randystacye.com on his skimmer pages at the recirc's, it'll show kind of how to hook stuff up.
__________________
- Danny Go SunDevils...there's always next year! |
#3
|
|||
|
|||
so i would need these uniseals?
Uniseals, 1/2" pipe size, 0.84" pipe o.d., 1 1/4" holesaw size Uniseals, 1" pipe size, 1.31" pipe o.d., 1 3/4" holesaw size http://www.aquaticeco.com/index.cfm/.../8600/cid/2009
__________________
75g begginer reef |
#4
|
|||
|
|||
i do believe you're correct. I'd order directly from aussieglobal.com, it'll be cheaper and the shipping is generally less than from the MO's since they have a standard base rate they go off of.
There's only a few standard sizes they come in and they're the regular pvc sizes.
__________________
- Danny Go SunDevils...there's always next year! |
|
|