|
#1
|
|||
|
|||
closed loop question
I just picked up a 30g cube, drilled with 5 holes in the back for a closed loop. 1-1in hole for the intake and 4-1/2in holes for the returns. My question is how many GPH can i run through this? I wanted to do somewhere around 700, but I'm not sure if the bulkheads are big enough to accomadate this amount of flow. What pump, or how many GPH would you recommend running through this setup. I plan on keeping mostly sps.
|
#2
|
|||
|
|||
bump
|
|
|