|
#1
|
|||
|
|||
How can I do this...?
Ok so my question is, can you use an external return pump without drilling sump? I really want to upgrade my return pump but getting the sump drilled isn't an option right now. Thank you
|
#2
|
|||
|
|||
One way would be to build a small stand for the pump to rest on then adding a piece of PVC to the input with a 90 degree elbow and another piece glued to the 90. Thats one way to do it im sure theres others out there also but not sure of what they are.
Hope that helps. Tracy
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#3
|
|||
|
|||
so just make the pump higher than water level in sump? any others with ideas, maybe a pic or drawing?
|
#4
|
|||
|
|||
^^^
|
#5
|
|||
|
|||
Here is a post I've made on the "over the top method" used it on 2 out of 3 sumps -- been running for years.
http://archive.reefcentral.com/forum...the+top+method Some additional pictures can be seen here. http://s5.photobucket.com/albums/y189/toddrtrex/Sump/
__________________
But Todd is right --- mhurley |
#6
|
|||
|
|||
thanks that definately helps
|
|
|