MOST reef tank project

ab5ebdxer · #1 01/05/2006, 10:22 PM

Hey guys,

Fritz and I will be at the MOST in Syracuse this Sunday at 1pm to work on the stand for the 750g tank. If anyone is interested in helping drop me an email.

Thanks

Mike

Jamie2337 · #2 01/05/2006, 11:09 PM

What is the MOST? Thanks!

Jamie

Blugobi · #3 01/05/2006, 11:28 PM

Quote:

Originally posted by ab5ebdxer
Hey guys,

Fritz and I will be at the MOST in Syracuse this Sunday at 1pm to work on the stand for the 750g tank. If anyone is interested in helping drop me an email.

Thanks

Mike

I was just there last weekend with my son...I may not be able to help this weekend...but would love to help in the future...let me know when is the next time you will be working on it...or if you have a schedule

George

Stephany · #4 01/06/2006, 01:12 AM

MOST = Museum of Science and Technology.
It's a good show.

Flanders · #5 01/06/2006, 11:49 AM

We'll keep you guys posted of the future work dates... any help is appreciated. We're really just getting started on this exciting project.

Fritz

ab5ebdxer · #6 01/08/2006, 04:43 PM

Hey guys above is Court and Fritz helping with the stand at the MOST today. These are the 4 x 4 supports of the stand.

We are planning on working on the stand again next weekend. We think two more good work days should get most of the work done.

I will keep you guys updated on when we will work next.

Mike

Jaffa · #7 01/08/2006, 10:46 PM

I had a great time today and it was wonderful to finally meet you guys.

How much did you finish after I left?

Flanders · #8 01/09/2006, 01:21 PM

We cut the top and bottom frame and a few more of the horizontal 5-foot supports. Thanks for coming, you were a big help and it was nice meeting you.

ab5ebdxer · #9 01/11/2006, 05:58 PM

Fritz,

Here are the numbers for the two bottom holes.

Holes on bottom as follows:

From Sides- 7.5" + width of side Pane 3/4"= total 8 1/4"...this is from left and right side.
From Back- 3 1/4" + width of back pane 3/4" = 4" total

If we have the 4x4's two and a half feet apart this may not be a problem.

Mike

Jaffa · #10 01/11/2006, 10:58 PM

So any idea when we are going to meet next? I'm willing to go in on a weekday evening (Friday?) if any one else wants to. I generally have to work on either Saturday or Sunday.

Flanders · #11 01/12/2006, 12:02 PM

Friday evenings usually for me. How about you Mike? This Saturday and Sunday I'll be busy though.

Flanders · #12 01/12/2006, 12:03 PM

Sorry, Friday evenings usually WORK for me.

Jaffa · #13 01/12/2006, 02:44 PM

Forgot I'm (supposedly) going skiing Fridya night.

Jaffa · #14 01/12/2006, 04:38 PM

Actually maybe not. There only appear to be two trails open and I'd much rather work at the MOST than be bored all night.

Flanders · #15 01/13/2006, 08:35 AM

Sorry but I can't make it this weekend. Next Friday is looking good though.

ab5ebdxer · #16 01/13/2006, 10:46 PM

Guys,

I am working overnights this weekend. Next friday would only be good for me in the evening.

Mike

Flanders · #17 01/16/2006, 02:44 PM

Next Friday evening is good for me. Anytime after 4:30 or so. How about you Court?

Jaffa · #18 01/16/2006, 04:41 PM

Depends on if there is skiing, which at this rate doesn't look too likely.

ab5ebdxer · #19 01/18/2006, 08:27 AM

What about Sunday? Friday I will be at work.

Mike

Flanders · #20 01/19/2006, 01:27 PM

Sorry but I will be out of town this Sunday also.

Jaffa · #21 01/19/2006, 04:14 PM

Sunday is out because of midterms(wince).

Fritz, are you still available tomorrow night? Skiing is looking like it's going to be poor to say the least.

Jaffa · #22 01/19/2006, 10:33 PM

Looks likes skiing is on. Next week looks good though.

Jaffa · #23 01/19/2006, 11:47 PM

Fritz, pm'd you my cell #. Call me if you were planning on the MOST tomrrow night.

Flanders · #24 01/20/2006, 03:13 PM

Looks like we're going to have to scrap this weekend. How about next Friday?

ab5ebdxer · #25 01/22/2006, 10:46 AM

Next Friday doesnt look good for me but next Sunday would work.

Mike