|
#1
|
|||
|
|||
peristaltic pumps
I need to know if someone that has a peristaltic dosing pump ever got just tubing from a tubing company?
I know I can get replacement tube for $20. Like to save in the long run say 50 feet for $100 would save a lot then 6 inches at $20.I saw some companies but need to ask here if anyone found a place that work for them. Any help would do.
__________________
Save the oceans. |
#2
|
|||
|
|||
sure. you could do that. why not?
|
#3
|
|||
|
|||
Quote:
__________________
Save the oceans. |
#4
|
|||
|
|||
You can try this company cole-parmer . they have almost every size tubing for peristaltic pumps. We use them for our slurry pumps and metering pumps at work. lots of fun goodies...
__________________
Jason |
#5
|
|||
|
|||
download the gilson minipuls 3 manual from their website. They list tubes by materials and ID and have charts with the flow you will get. Then order the tubing you want from mcmaster.com. Just make sure you order something with a decent wall thickness and pressure rated.
|
#6
|
|||
|
|||
You can get the same tubing that cole-parmer sells, but for a LOT less $ from usplastic.com. I use L/S 13 tubing and got the norprene tubing because it resists alkalai the best and is also long lasting. I use the tubing to dose 2-part.
Tubing life: http://www.coleparmer.com/techinfo/p...iew.htm&ID=398 Tubing (usplastic.com): http://www.usplastic.com/catalog/pro...ookie%5Ftest=1
__________________
"Misers get up early in the morning; and burglars, I am informed, get up the night before." - GK Chesterton |
#7
|
|||
|
|||
Thank you all for your help.
Crumbletop which part number item of us plastic on that page?
__________________
Save the oceans. |
#8
|
|||
|
|||
Quote:
What size are we looking for?
__________________
Save the oceans. |
#9
|
|||
|
|||
What size tubing do you want? The L/S 13 tubing is item #54288 (1/16" inner diameter, 3/16" outer diameter).
__________________
"Misers get up early in the morning; and burglars, I am informed, get up the night before." - GK Chesterton |
#10
|
|||
|
|||
Quote:
I look at it and ID 1/4 or 5/16, OD 7/16 , wall .90 or 3/32. That is way i asked I did not see one close to it.
__________________
Save the oceans. |
#11
|
|||
|
|||
I don't know about that pump, but if it takes tubing that has an outer diameter of 7/16, then you should be fine with tubing of the same outer diameter. Item #54293 is 7/16" OD.
__________________
"Misers get up early in the morning; and burglars, I am informed, get up the night before." - GK Chesterton |
#12
|
|||
|
|||
Quote:
__________________
Save the oceans. |
#13
|
|||
|
|||
I got the other type but will not work as the OEM type.
they must have a special made softer tubing and this motors on dosers not strong to turn harder tubing.
__________________
Save the oceans. |
|
|