|
#1
|
|||
|
|||
running skimmers in sequence???
I run an ASM G3 with gate valve and mesh mod on my 125g fowlr. I'm going to be doing the recirc mod this weekend. I have a second ASM G3 that I picked up last weekend. If did the recirc on that one too could I feed skimmer A with a pump and then let skimmer A feed skimmer B?
|
#2
|
|||
|
|||
no help from the skimmer gurus?
|
#3
|
|||
|
|||
No .
Water that has already been skimmed will not have enough nutrients to form a foam head for removal. If you could feed each one from a seperate overflow, that would work well. |
#4
|
|||
|
|||
i would rather have both skimmers getting dirty water. feeding skimmer b. with already skimmed water from a. is pointless IMO
__________________
looking for grammar check ------------------------------------------------ |
#5
|
|||
|
|||
my thoughts were that skimmer B would be able to get anything skimmer A missed. But feeding from seperate overflows sounds like a good idea. Thanks for the advice.
|
#6
|
|||
|
|||
one g3 should be plenty, and you would most certainly be wasting power by placing the skimmers in series.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|