|
|
|
|
#1
12/12/2007, 08:28 PM
|
|||
|
|||
|
FS: Deltec calcium reactor + reactor goodies
Deltec PF509 Calcium Reactor, used in great shape, with 9 pounds of Rowalith C+ media (enough for 2 complete fills). $320 plus shipping:
http://www.deltecusa.us/calciumreactors/pf509.php http://www.deltecusa.us/aquariummedia/rowalithcplus.php   CO2 deluxe dual regulator, with integrated solenoid and bubble counter, used, in good working condition, slight surface rust, $100: http://www.marinedepot.com/ps_ViewIt...ct~CO3117.html Second calcium reactor chamber, 23" tall, 5" diameter 1/4" cast acrylic tube (17.5" tall inside chamber). John guest fittings (input on bottom, output at top). Keyholed flange at top, internal shelf for keeping media off the bottom for better flow. Also includes a full container of ARM large media. This is a great way to lower the pH of the effluent from a calcium reactor by adding this inline. $120 plus shipping.  Inline high-precision flow meter from Blue-White, machined from an acrylic block. John guest input and output fittings. All plastic parts, with exception of center rod, which has been upgraded to titanium (so no concerns about rust!). This reads from .1 to 1.0 liters per minute in .05 increments. Along with the included high-precision needle valve (also with john guest fittings), effluent rates are both easily controlled and monitored. No more counting drops!! $100 for both plus shipping.  Also shown in the picture is an inline ph probe setup (again, john guest fittings). Works great for adding an inline probe to monitor the pH of the effluent from the reactor. $10 plus shipping. If you buy the entire setup, I'll knock $100 off, and cover shipping and paypal fees, so $550 shipped!! Mark |
|
|
Linear Mode
