|
#1
|
|||
|
|||
CSS65 doesnt fit
Will im having trouble setting up my CSS65 if i put the pump on the box will tip. Also if i put the box so there is one inch between the hose and the pad the pump wont fit. Here are some pictures. Any idea what i am doing wrong.
__________________
Im having so much fun. |
#2
|
|||
|
|||
You could always get rid of the box. Just use a 90 degree pvc elbow, a short piece of pvc pipe, and a prefilter for a mag pump. It works pretty good and stops the microbubbles and it frees up some space. If you want to keep the box, can you raise the box up? You should have it close to the top of your water line.
|
#3
|
|||
|
|||
You can cut the return hose so that it doesn't push the box down. Why is your hose for the pump and main unit so short? Did you cut it that short? I remember it had at least an inch or gap then the box won't be hitting the pump. I'd to turn the return hose elbow a little toward the side so that the box won't hit the pump.
|
#4
|
|||
|
|||
if i raise the box up any more there will be no room. not even the 1' right now there is not even a 1inch
__________________
Im having so much fun. |
#5
|
|||
|
|||
Just extent the pump farther down with a longer piece of vinyl tubing.
__________________
Zim |
#6
|
|||
|
|||
ok i will thanks
__________________
Im having so much fun. |
|
|