|
#26
|
|||
|
|||
Kent E,
Are those pictures in your gallery of your 450 gallon reef??? |
#27
|
|||
|
|||
Quote:
Actually, I think the idea of just spotting the coral heads is brilliant and your current plan is a good one. It will cut down on your costs and should look spectacular. As long as you don't have clams in the sandbed you should do great. |
#28
|
|||
|
|||
Quote:
|
#29
|
|||
|
|||
I do have a very small triangle shadow on the back wall. But other than that it doesn't look unbalanced to me.
Here's a really old thread http://archive.reefcentral.com/forum...ight=kents+450 Here's the 1000 I'm working on: (haven't gotten to the lighting yet but it will be 3- 250w with lumenarcs) http://fingerlakesreef.com/forum/vie...=asc&start=580
__________________
Tossing conventional out |
#30
|
|||
|
|||
Quote:
__________________
"Try not to become a man of success but rather a man of value" Albert Einstein |
#31
|
|||
|
|||
I can't guarantee it's going to work yet, it's a theory. But as it is I don't want the glass to be lit to cut down on scraping, and so that eliminates a lot of tank along the parameter. The lights will be approximately 2 feet above the water so that will give a 3' spread and that covers the tank.
I'm going to test the lighting with a par meter once its set up and the water is in. If the values are high enough I'll go with it. If not it'll be plan B -400 watters.
__________________
Tossing conventional out |
#32
|
|||
|
|||
Kent E: I'll be looking over your shoulder hoping it works, regardless, it seems light movers are the way to go, are you entertaining the arc model for the rail noted on your build thread? I would think the distance variation would be problematic.
not to take this thread off course 46bfinGA, but I think it's still relevant here
__________________
"Try not to become a man of success but rather a man of value" Albert Einstein |
#33
|
|||
|
|||
That would be more of an experimental thing. Right now I may just do 3 static lights- depends on the spread.
__________________
Tossing conventional out |
#34
|
|||
|
|||
Quote:
I like the idea of the light movers. And If the two lights dont look right on my tank i may just go that route. Im pretty sure retrofitting the light movers after the fact shoudnt be too big of a chore. |
#35
|
|||
|
|||
I'm also planning an 8'x4'x25" tank and have done alot of research.
The most cost effective (in terms of energy efficiency, if not initial purchase cost) lighting by far is 175W Iwasaki 15k mogul bulbs on e-ballasts and in LumenArc 3 or similar large-spread reflectors. The Iwasaki/E-ballast combo had the highest efficiency rating of any bulb tested by Sanjay Joshi. You can easily grow SPS at the sandbed under the combo i suggest. 16 x 54 watt T5 equals 864 watts versus 3 175 w setups at a total of 525 watts (should be more then enough) or 4 setups at 700 watts if you want to strongly light the ends. Bulb changeouts will also be substantially less since 16 T5 bulbs aint cheap. To make it perfect, you would probably want to have some supplemental actinic lighting since the Iwasaki has lots of 450nm blue but almost no 420 actinic spectrum. Either VHO or T5 supplemental will take care of that one deficiency and fill in the front and back of the tank. I have had a 48", 8 bulb Teklight and they are a pretty crappy product from a crappy company. T-5s have to be actively cooled to have maximum PAR and lifespan and the Teklight doesn't do it. If your reflector gets splashed it will permanently stain/discolor and if you put a shield on you will further cook your bulbs and deplete Par and lifespan. If you want T-5, a retro is a cheaper and better option since you can blow a fan across it. James
__________________
Old Reefers Never Die, they just...join the crew! Last edited by jamesdawson; 12/27/2007 at 02:51 AM. |
#36
|
|||
|
|||
Quote:
__________________
"Try not to become a man of success but rather a man of value" Albert Einstein |
#37
|
|||
|
|||
Thanks for the info James Dawson. I had no Idea I could get away with 175 MH on this tank. I may go that route and use the Lumenarc Reflectors. I do love the shimmer of MH.
|
#38
|
|||
|
|||
Quote:
|
#39
|
|||
|
|||
I would question 175 watt with SPS. I'm no expert, I use 400 watt on my 36" deep with great results...
I'm also interested in the track movers. Always planning a new system, 1,350 down the road. I've seen track light movers at a LFS one bulb on a 4' tank. The only problem is half the tank is dark/ shaded as the light moves. I really don't like the way it looks out of balance... Maybe it's just me? Looking forward to finished tank pictures with lights on... Happy Reefing |
#40
|
|||
|
|||
You can blow a fan across the Teklight, but not with a shield on to protect the reflectors from staining unless you do the Hahnmeister mod (he bent an acrylic shield down at one side and put in a cross-flow fan to evenly blow air the width of the fixture.
175W IWASAKI 15K has an efficiency of .5261 on an IceCap ballast and will grow SPS at the sandbed on a 24" deep tank. It is the most efficient bulb ever tested by Sanjay (about double the efficiency of most other MH bulbs). What I claim only applies to this bulb on an IceCap or better e-ballast. Light movers are also an efficient way to light a tank with less bulbs/electricity. I also don't like the look of a tank with lots of dark areas as the light mover moves. James
__________________
Old Reefers Never Die, they just...join the crew! |
#41
|
|||
|
|||
Anyone have any movies of these light movers in action? Im building a 96"x48"30" tank and i am trying to figure out the lighting. I want something thats not going to cost an arm and a leg to run each month. The LED lights are out because they just cost to dang much.
__________________
PJ Click the Little Red house for my New Tank Build! |
#42
|
|||
|
|||
Pj light movers would make for a really boring movie. They move rather slow. Maybe a minute or so to go across the tank.
__________________
Tossing conventional out |
#43
|
|||
|
|||
i was just wondering what the dark spots would look like. Im trying to figure out how to light my new tank. 84"x48"x30" Trying to keep the Electric bill low but i also want enough light for sps.
__________________
PJ Click the Little Red house for my New Tank Build! |
|
|