|
#1
|
|||
|
|||
what can i do with a topfathom skimmer?
hello all
I have the worlds best skimmer(hard to keep from laughing when i wrote that).Just curious what could i use it for or how could it be modified to something useful. I know it makes a great paper weight or food holder. Surely theres something i can use it for with the right mods Tracy
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#2
|
|||
|
|||
I own one. Pulls out the "stuff" like nobodys business. I did order a Genx needlewheel, I may make it a recirculating skimmer. Haven't decided yet.
I will mesh mod it though. I bought this off of a friend. He had it on a 120g. The thing spit out a cup of nasty black stuff everyday with a light Bioload. I get more of a tea color in the bucket, because all the solids seem to stay in the line and the cup. I have 1 small Sailfin, 4 Blue green Chromis and an Engineer goby. This is after 24hrs. Collection Cup. Drain Line. IMG]http://img171.imageshack.us/img171/8793/1002642ko8.jpg[/IMG] 5g Collection bucket. That is about 1/2 a gallon, And this is set dry. These may not look pretty, but they work... |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
i couldnt get mine to do nothing at all. i had the water line at the base of the cone where the manufacturers site said to put it. I did have a rio pump on it though. Thats why im asking what i can do to make it perform better its not being used now but since i have a new skimmer (custom built) i figured great diy project time.
Hoping others chime in also. I may make it a carbon container or something if no one else chimes in. Tracy
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#5
|
|||
|
|||
What size Rio? Which Venturi are you using? How is it plumbed?
It took me a while to get it adjusted right, it is about half way up the cone. Works great. I have a friend that runs the big commercial ones in his Fish store. He says he has tried a lot of skimmers over the years, but these are set and forget. Very consistent. I have to agree with him. |
#6
|
|||
|
|||
I have had a Top Phathon 100 for 3 years on a 125 gallon plus 30g sump. That is alot of water to skim. It has done exactly what it is supposed to do plus more. I came with a Rio pump also. No problems. Only clean it every 10 months or so. Pulls out the gunk like no other. Beleive me I have put high end skimmers on customers tanks and they seem to perform the same. I would put the water line just below the smallest portion of the neck or cone, just below where the cupwould sit in. Ive seen them all, but what ever.................
|
#7
|
|||
|
|||
ill dig it out of the closet i think its a rio 600 but im not swearing on it. The venturi is the one that came on it. when i say it did nothing i mean literally nothing. In over a month all it pulled out was maybe 3 inches in a gallon milk jug. I thought maybe its doing just fine very light bio load (1 cinamon clown 1 clarki clown 1 yellow tail damsel 2 3 striped damsels) in a 75. I bought the custom made one and have to change out the cup twice a day from the gunk it pulls out. If i can make it work ill do it and use it. Ill post some pics of it tomorrow.
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#8
|
|||
|
|||
Mine is a Rio 2500. Lots of water and air equals lots of removal.
|
#9
|
|||
|
|||
Mine is a Rio 2500. Lots of water and air equals lots of removal.
|
#10
|
|||
|
|||
What size Rio? Which Venturi are you using? How is it plumbed?
It took me a while to get it adjusted right, it is about half way up the cone. Works great. I have a friend that runs the big commercial ones in his Fish store. He says he has tried a lot of skimmers over the years, but these are set and forget. Very consistent. I have to agree with him. |
#11
|
|||
|
|||
mine has a rio 1700 on it that might be the prob too small a pump.
Ill see what else i have laying around and try a bigger pump on it. wonder how good say a mag 9.5 would work?
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#12
|
|||
|
|||
Quote:
How did you double-post with 45 minutes between each post? o_O |
#13
|
|||
|
|||
i just noticed that myself lol
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#14
|
|||
|
|||
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#15
|
|||
|
|||
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#16
|
|||
|
|||
heres the pics i hope lol
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#17
|
|||
|
|||
I dont see where the air is entering the intake of the pump. Is there some sort of air intake anywhere?
|
#18
|
|||
|
|||
none on the pump itself. As far as i can tell anyways i think the only air intake is on the pipe that connects the pump to the canister
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#19
|
|||
|
|||
ohh yeah, now i remember these skimmers. Hmm, hopefully someone knows how to make a better venturi for it!
|
#20
|
|||
|
|||
im thinking about modding the crap out of it whether it be a diff pump or making it a recirc and maybe putting a baffle inside to help churn the water even more. Was hoping someone would chime in with some ideas on it although 3 or 4 ppl say theres works good i couldnt get mine to.Oh yeah the metal clamps have been replaced by plastic clamps
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
#21
|
|||
|
|||
I have a TF-300 that works great with the original venturis (and a very large pump), it is T'ed from a return pump running a pressure filter at ~20psi, on a 400gallon fish only system. Not quite the same as most home aquariums. I have seen some run off the little giant external pumps and those worked well too. Though I think that having a higher pressure pump would help alot.
Here is their pump recomendation chart http://www.topfathom.com/pump.html I had tried using a MAG7 but it doesn't seem to produce very good bubbles even from a single venturi, I think it is mostly due to the low pressure pump. |
#22
|
|||
|
|||
I would think that the venturi would need to be on the suction side of the pump to pull air in.JMO
__________________
DENNIS |
#23
|
|||
|
|||
Quote:
|
#24
|
|||
|
|||
It depends on the design of the venturi as well. The venturi that comes with this skimmer, is designed to be on the pressure/outlet side of the pump. It uses a restriction to cause a pressure change allowing intake of air.
The type of "venturi" that goes on the suction side of the pump is a much more open design than the ones with this skimmer. It allows the suction of the pump to pull in air, and through the impeller. I suppose it also depends on the type of pump/impeller used. |
#25
|
|||
|
|||
wonder how good a carbon filter it would make or say a phosban reactor or anything else. I really dont need it as a skimmer now but hate not to use it somehow or another. Im also thinking about doing a re-circ mod on it. Just trying to come up with some diff ideas for it.
__________________
If id known finding Nemo was this costly I'd probably.........still set up my tank lol |
|
|