|
#1
|
|||
|
|||
top off question
i have a 55g sump under my 125g, but i may have screwed up putting in one of the baffles. i made a very small area for the return pump, so i might have some issues there anyway, but it also turns out that's where my ATO needs to be.
the measurements for the return pump and ATO space is; 11 3/4" long, 4 3/4" wide, and 8" deep. is that big enough? or should i move the baffle? here's some pics
__________________
Do you know how hard it is to swing from a webb with no depth perception!?!? |
#2
|
|||
|
|||
That is really small even with ATO. I'd move the baffle.
__________________
[This space for rent] |
#3
|
|||
|
|||
that's what i was thinking, too. oh well, what's a couple more days?
__________________
Do you know how hard it is to swing from a webb with no depth perception!?!? |
#4
|
|||
|
|||
do i even really need a baffle there? would i be ok to take a dremel or a rotozip and just cut the majority of the baffle out? i might leave 2-3" left on the bottom to keep out some of the debris.
or would i be better off cutting the whole thing out and moving it?
__________________
Do you know how hard it is to swing from a webb with no depth perception!?!? |
|
|