Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > New to the Hobby
FAQ Calendar Today's Posts Search

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12/10/2007, 12:01 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
180g upgrade In Wall

I m upgrading my 33g to a 180g (just small steps at a time)
The tank is "in wall" backing into my storage room, this is a 800sq foot room with lots of storage and furnace equipment in it.
I was wondering if I have to insulate it or waterproof the tank wall at all, I cannot waterproof the whole room, so I don't know if I should do any waterproofing.
The tank is 180 and the sump will be 60g, I plan on putting one of those Home Depot dehumidifier in and plumbing it directly to the sewer drain.

Here is a picture of where the tank will go.

  #2  
Old 12/10/2007, 12:06 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
Another Pic

  #3  
Old 12/10/2007, 01:19 AM
stevelkaneval stevelkaneval is offline
Registered Member
 
Join Date: Nov 2007
Location: oshkosh wisconsin
Posts: 477
were are the kleenex??????????
__________________
I belong to reefahaulics annonymus. "My name is Steve and im an addict."
  #4  
Old 12/10/2007, 01:22 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
what do you mean?
  #5  
Old 12/10/2007, 01:55 AM
WarrenAmy&Maddy WarrenAmy&Maddy is offline
Registered Member
 
Join Date: Aug 2007
Posts: 620
Quote:
Originally posted by radar99
what do you mean?
probably crying he is so jealous!
  #6  
Old 12/10/2007, 01:58 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
slow but stupid, great combination for me.
  #7  
Old 12/10/2007, 02:04 AM
WarrenAmy&Maddy WarrenAmy&Maddy is offline
Registered Member
 
Join Date: Aug 2007
Posts: 620
Quote:
Originally posted by radar99
slow but stupid, great combination for me.



hey you might search around here on RC
there are people who have had very creative ideas for doing what you are doing... waterproofing rooms, walls etc etc...

good luck!

regards
  #8  
Old 12/10/2007, 08:45 AM
draleigh draleigh is offline
Registered Member
 
Join Date: Dec 2006
Location: Ohio
Posts: 273
waterproofing the room? I assume you mean the drywall?
There is a specific drywall that you want to use in a high humidity application. I think it is gypsum board vs. standard drywall. It is green in color - and of course cost more
  #9  
Old 12/10/2007, 08:54 AM
NirvanaFan NirvanaFan is offline
Premium Member
 
Join Date: Jan 2007
Location: Fairport, NY
Posts: 429
You might also want to think about installing a fan that will kick on once the humidity goes over a certain percentage. The fan could be something like people have in their bathrooms that vent to the outside.
  #10  
Old 12/10/2007, 08:55 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
I believe that I know how to waterproof, I just want to know if it is a necessity, seeing as how I can't waterproof the whole room, do I have to waterproof the display wall?
  #11  
Old 12/10/2007, 09:09 AM
hmello@bermexin hmello@bermexin is offline
Registered Member
 
Join Date: Jan 2007
Location: Michigan
Posts: 862
In my opinion you are doing what you need to do with the dehumidifier and using green board if that is what you are going to use. You should be okay. The exhaust fan in place for added protection would probably be a good idea to do in the building stage rather than having to do it later if needed.
__________________
Henry G. Mello
  #12  
Old 12/10/2007, 09:47 AM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
Thanks for the reassurance, I was hoping that would suffice.
  #13  
Old 12/10/2007, 10:12 AM
chrisqueenz chrisqueenz is offline
Registered Member
 
Join Date: Jun 2006
Location: Rochester New York, USA
Posts: 514
Looks like a great build, 180 is a great size
  #14  
Old 12/10/2007, 12:30 PM
mg426 mg426 is offline
Registered Member
 
Join Date: Jan 2006
Location: maryland
Posts: 5,392
Nice start, post some more pics when you get it going.
__________________
I found a way to make a small fortune running a reef tank. Start with a large fortune. Unofficial President of the SEACLONE haters club
  #15  
Old 12/10/2007, 01:56 PM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
Thanks guys, I'm going to the city this weekend to scope out equipment, this won't get going good for a few months, I'm going to work on the room (electrical, fan, plumbing, waterproofing, stand, etc) then I'll get a tank and sump and it will then be pretty hectic.
I'd like to start a build thread with lots of pics but I'll wait until the room is done and ready for the tank.


Ken
  #16  
Old 12/10/2007, 02:15 PM
hmello@bermexin hmello@bermexin is offline
Registered Member
 
Join Date: Jan 2007
Location: Michigan
Posts: 862
We are picture whores here if you haven't noticed.
Please post pics of the room build also!
__________________
Henry G. Mello
  #17  
Old 12/10/2007, 02:54 PM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
Well then, here are just a couple more for you picture "whores" out there, but this is it, you'll have to wait for your next FIX till later, I mean it now.

Storage room before I started tearing


Wall where tank is going


Cooking 40lb rocks from old 33g


Guess which pail I used first?
  #18  
Old 12/10/2007, 03:06 PM
hmello@bermexin hmello@bermexin is offline
Registered Member
 
Join Date: Jan 2007
Location: Michigan
Posts: 862
OK then! See you next time!
__________________
Henry G. Mello
  #19  
Old 12/12/2007, 04:54 PM
Psyire Psyire is offline
Premium Member
 
Join Date: Sep 2004
Location: Alberta, Canada
Posts: 1,847
Heys,

I did some quick searching and pulled up this thread. Now I have a little better idea of what it is you are looking at doing. In regards to some of your questions you had when you dropped by earlier I have slightly different answers. For your tank overflow I would be tempted to have it built onto the back of the aquarium rather than inside of it. That way it won't take up any of your 'internal' tank space. If you search around you'll probably find some good examples of this. This will give you a lot more room to work with in the tank for aquascaping and such. (and more room for corals and fish to swim)

As for humidity I don't think I would do a whole lot to 'protect' against it. If you end up having problems, then you have to eliminate it rather than use special materials that will withstand it. Dehumidifier or external venting would be options.

Catch ya later.
  #20  
Old 12/14/2007, 08:58 PM
radar99 radar99 is offline
Premium Member
 
Join Date: Feb 2006
Location: Alberta
Posts: 43
Those are both good points.
I would like to again thank you for the tank tour, it was very informative, you have a beautiful setup.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009