Entire Setup for Sale in Las Vegas

[scbauer]

Okay, as many of you know, after my new system was up less than 6 months, I had to move. Unfortunately, during the move, I lost everything. I have a feeling it will be a long time before I will get back into this hobby (but I will), and when I do, I'll want the latest and greatest equipment. Because of that, there isn't much point in me having all of my current equipment just sit around. Here is what I have to offer, buyer pays for shipping:

First price is either what I paid or what the item would cost to buy new. Second price is the price I'm selling the item for.

• 29-Gallon Acrylic Tank/10-Gallon Sump/Stand/Bulkheads/Durso/Fan $500 $250
• OceansMotions SuperSquirt (with 4 unions attached) $205 $180
• Iwaki MD40 RLXT (Japanese Motor) $265 $200
• EuroReef ES5-2 (handles up to 75 gallons) $250 $220
• Mag 7 $55 $50
• Mag 2 $35 $30
• Sunlight Supply ReefOptix III+ Pendant $100 $75
• IceCap 250W Electronic Ballast $120 $100
• Pheonix 14,000K 250W DE MH Bulb $70 $35
• Custom Built Automatic Top-Off System $50 $50
• Neptune Systems AquaController Jr (backlight) w/ Temp and pH probes $250 $225
• Custom Built Electronic Control Panel with 10 GFCI X10 controlled receptacles, each manually switchable with American DJ PC-100A $150 $100

Total package would be around $2,000 new (I'm sure I spent more), but I'll sell the whole setup to somebody local (Vegas or Souther California) for $1,200 (plus I'll throw in some extra stuff I have). If I have to part out, the prices listed are firm.

Thanks, and feel free to post questions about the equipment, but don't ask me to lower the price.

-Scott

[scbauer]

Okay, a few comments...

MH bulb is about 6 months old.
I'm located in zip code 89129 (so you can figure out shipping)
Finally, any offers I receive will be put on hold for about a week because I would rather sell the whole system. If I don't have any offers in a week or so, I'll start parting out.

-Scott

[scbauer]

And by the way, if you buy the tank, OceansMotions Supersquirt, and the Iwaki MD40, this is a PERFECT closed loop system. The tank has 6 holes drilled in it, 2 for intake and 4 for the output of the OMSS. The bulkheads, ball valves, unions, and Spa Flex pipe would probably cost over $100.

-Scott

[jimcoman]

Interested in the Pheonix bulb.YGPM

[starrd27]

If you part out, I'm interested in the RO III and the Ice Cap Ballast.

Thanks!

[bradleyj]

Do you have a picture of your control panel?

[scbauer]

Originally posted by bradleyj
Do you have a picture of your control panel?

Yes, PM me your e-mail address