|
#1
|
|||
|
|||
water too clean
bought a euro-reef rs 135 no micro bubbles in chamber in tank water. put in new salt water works fine. what gives.
|
#2
|
|||
|
|||
I'm not sure exactly what you mean.
__________________
Jonathan Bertoni |
#3
|
|||
|
|||
well, i put my new skimmer in my salt mixing tank with water that has aged 48 or so hours and my skimmer is fine. i put the skimmer in my sump and no micro bubbles. the skimmer is the same level in both tanks.
|
#4
|
|||
|
|||
i have also torn apart the pump and cleaned and cleaned the venturi and air line. when i move the skimmer from mixing tank to sump it does not sit it still has water in it. its weird.
|
#5
|
|||
|
|||
so i guess what my question is, a. is it possable for water to be that clean. b. or have i not done enough water changes and my water is lacking something, c. my frogspawn or plate coral or something else is excreting something to cause this and i need carbon.
|
#6
|
|||
|
|||
If there's no bubbles in the water, then the air intake to the skimmer isn't working, or there's some similar problem. No water quality problem should prevent a skimmer from injecting air into the water.
__________________
Jonathan Bertoni |
#7
|
|||
|
|||
what would be a similar problem. the venturi and air line seem to be working fine. as i hear gurgling sound coming from the air line. in both tanks.
|
#8
|
|||
|
|||
i guess i need to clarify there is bubbles in the chamber large ones in the sump. and fine micro bubbles in the mixing tank. when i put the skimmer in the sump i might as well be putting it in fresh water.
|
#9
|
|||
|
|||
Okay, I'm confused. Can you post a picture of your skimmer in action in the tank? If the skimmer has air bubbles in it, it's likely fine.
__________________
Jonathan Bertoni |
#10
|
|||
|
|||
yes i can give me a half hour or so thanks!
|
#11
|
|||
|
|||
camera is dead will charge
|
|
|