|
#1
|
|||
|
|||
JBJ Auto Top Off Setup Question
I bought a JBJ Auto Topoff when I first started in the hobby with my stock NC 24. Couldn't figure out from the instruction how to setup the thing and because of the hood I didn't want to mess with it to much. I have a NC 28 with the open back chambers and am looking into an auto topoff for this tank and I am wondering how people have it installed.
Any help would be much appreciated. |
#2
|
|||
|
|||
I have my float switch hanging in the 3rd chamber. Water is pumped via an aqualifter. Here's a few pics of my set up, let me know if you have any more questions.=] BTW, I only use one sensor.
__________________
Life moves pretty fast. You don't stop and look around once in a while, you could miss it. - F. Bueller |
#3
|
|||
|
|||
Thanks for the pics.
That is exactly what I want to do except my tank will be on a stand so the RO/DI Container will be on the floor, figure I'll need something like a Maxijet 600 to pump the water up that high. That helps a lot. Thanks |
#4
|
|||
|
|||
MJ600 would work. I use a minijet 606 since it's smaller and slightly less expensive. Here's my minijet606 for my 25g which is located under the tank. The jug with the red lid is my ATO w/ minijet 606.
__________________
Life moves pretty fast. You don't stop and look around once in a while, you could miss it. - F. Bueller |
|
|