Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Lighting, Filtration & Other Equipment

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01/10/2008, 11:01 PM
moocow moocow is offline
Registered Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 36
How to determine return pump size?

I have a 58 gallon tank, aiming for about 250-300 GPH.
The distance from the pump to the outlet in the tank is about 5 feet.
Of course there will need to be either 90degree elbows, or 45's.
I know 90's cause A LOT of resistance.

I tried to google this but all I found was that using PVC piping is advised ?AGAINST? on the return line??

It causes less resistance to use flexible vinyl or silicone tubing?
Do most people use flexible vinyl tubing?

Appearance isn't really a big deal, the whole thing will be concealed.
So how do I determine the heading, and what material should I use??
  #2  
Old 01/11/2008, 12:10 AM
moocow moocow is offline
Registered Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 36
bump
  #3  
Old 01/11/2008, 12:33 AM
FranktheTankTx FranktheTankTx is offline
Registered Member
 
Join Date: Dec 2007
Posts: 58
Oh I would highly recommend using flexible return line. Use as little hard pvc as possible. It's so much easier on your pumps w/ flexible line. And you don't have to worry about leaks with all the pvc joints.

I don't know why people use hard pvc.
__________________
Frank
  #4  
Old 01/11/2008, 12:40 AM
moocow moocow is offline
Registered Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 36
so far flexible seems the way to go. even on the intake side too.

So how do I determine head height?
Could I just guess-timate?
about 5 " plus another foot or two for any bends.
I guess that would put me at about the Mag Drive 5.
Flow rate: 500 gph
max head: 10 ft.
I was planning 300gph+ so I guess that seems good, right?
  #5  
Old 01/11/2008, 12:51 AM
FranktheTankTx FranktheTankTx is offline
Registered Member
 
Join Date: Dec 2007
Posts: 58
Yea, generally you're looking at 3 or 4 feet to the tank. A Mag 5 would put you in the 310-380gph area.
With flexible line, you won't really have the bad bends that occur in hard pvc. I'd say a mag 5 would be fine for what you say you want. Put a ball valve on the return line to control flow. It won't hurt to dial it back slightly if you need.
__________________
Frank
  #6  
Old 01/11/2008, 01:07 AM
Aquaticman74 Aquaticman74 is offline
Hawks Rule!
 
Join Date: Sep 2005
Location: Calumet City IL
Posts: 3,039
All you need is 3-5x turnover through your sump. I would use an Eheim 1250. Should be very little head loss using spa-flex.
__________________
Mike

Sandbeds operate like wormholes and the excess nutrients and detritus are transported to a sister galaxy - Bomber

12-7-41 & 9-11-01 Never Forget!
  #7  
Old 01/11/2008, 03:35 AM
DanInSD DanInSD is offline
Registered Member
 
Join Date: Jun 2005
Posts: 633
I was told that each 90 is equivalent to about 1 foot of head pressure. I agree that the use of as much flex tube as is "reasonable" is the best solution.


Dan
  #8  
Old 01/11/2008, 07:26 AM
FL.Joe FL.Joe is offline
Registered Member
 
Join Date: Jan 2008
Location: St. Petersburg, Fl
Posts: 12
seems like flex is the way to go. which is the best to use?
__________________
Be patient, i'm simple minded
  #9  
Old 01/11/2008, 07:43 AM
dkh0331 dkh0331 is offline
Grampa Extroardinaire
 
Join Date: Jan 2003
Location: Close to the edge, down by a river
Posts: 3,095
flex pvc= flex pvc. There isn't one that is better than another.

Numerous locations online to order - here's one http://www.flexpvc.com/

Some of big boy hardware box stores carry it.
__________________
Too young for Medicare

Too old for women to care
  #10  
Old 01/11/2008, 09:37 AM
viggen viggen is offline
Registered Member
 
Join Date: Sep 2004
Location: Dayton, Ohio
Posts: 784
I would also go with a eheim pump

I hae used Mag pumps but personally I will never have anotherone inside my house. They are just to noisy.....

Eheims are 2x's the price but they are silent!!!
  #11  
Old 01/12/2008, 12:48 AM
chris4869 chris4869 is offline
Registered Member
 
Join Date: Jan 2006
Location: Bay Area, California
Posts: 241
I replaced my Mag pump three times so far in a year. IMO the Eheim pump is cheaper in the long run.

I like using vinyl tubing on smaller tank. It absorbs vibration a lot better than hard pvc.
__________________
Broke @55
  #12  
Old 01/12/2008, 02:10 AM
moocow moocow is offline
Registered Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 36
so, do you think the eheim 1250 would be okay.
It says 320GPH 6.5 ft max head.
I'm having with the head loss calc. It seems just not right.
Or i'm not using it right which is more likely.
On the DRfostersmith site it says
outlet: 12/16 mm millimeters? geeze. What size tubing is that? 3/4inch?

Anywho should I use that pump or the next one up which the 1260.
Quite a price jump between the two from $70-120. woo.

Note: I'll plan to have power heads inside the tank, plus more than likely an Eheim 2217 canister pump which pushes about 250GPH I believe.
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 04:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009