Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community Archives > General Interest Forums > Advanced Topics

 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01/08/2008, 12:29 AM
reefmutt reefmutt is offline
Registered Member
 
Join Date: Apr 2003
Location: mtl. canada
Posts: 83
lighting question for someone who knows electricity

I'm not sure if I should post this here or in the lighting, filtration...forum, anyways here is my question: I have a european t5 light fixture which runs on 230v and 50 hz.
I want to run it here in Canada. I have a 220v line ready to go but here we run on 60 hz.
I am wondering if the different frequency will affect how the gasses burn in the t5 bulbs. Might there be a shift in spectrum or intensity from the norm due to the slight difference in voltage or frequency?
thanks
__________________
Matt.
  #2  
Old 01/08/2008, 10:22 PM
H20ENG H20ENG is offline
Ozone Sniffer
 
Join Date: Jul 2002
Location: NORCAL (Vacaville, CA)
Posts: 4,395
Hmm, Great question for PaulErik here on RC.
I do know that the ballasts can be run on 208-230V 60Hz just fine. we do this all the time at work (art museum showing pieces from around the world). AFAIK, no detectable color shift in the lamps.
__________________
"Not cheap, but silent and absofrickenlutely no bubbles"

"Be sure and wear a speedo lest tangs nest in your britches"
  #3  
Old 01/08/2008, 10:38 PM
reefmutt reefmutt is offline
Registered Member
 
Join Date: Apr 2003
Location: mtl. canada
Posts: 83
Thanks for the reply, H20ENG.
Yes, I have come to that conclusion as well from others who say as you, that the ballast lights up the bulbs, no problem. But I am wondering if there will be any color shifts, because theoretically, that difference in frequency will alter how often the gasses get hit with electrical impulses... (I think.., I really don't know how it works, but I have talked to a few people who don't exactly know how it works either, but know more than me!)
__________________
Matt.
  #4  
Old 01/08/2008, 11:10 PM
H20ENG H20ENG is offline
Ozone Sniffer
 
Join Date: Jul 2002
Location: NORCAL (Vacaville, CA)
Posts: 4,395
AFAIK the color does not change. Once the gasses are ionized inside the lamp, changing the frequency slightly should not affect it.
In the case of the newer lamps, the output frequency is electronically controlled anyway. Not so in the old magnetic ballasts though.
__________________
"Not cheap, but silent and absofrickenlutely no bubbles"

"Be sure and wear a speedo lest tangs nest in your britches"
  #5  
Old 01/09/2008, 07:17 AM
reefmutt reefmutt is offline
Registered Member
 
Join Date: Apr 2003
Location: mtl. canada
Posts: 83
O.k. so the short answer is that I shouldn't worry about it. That's good to know.
But just out of curiosity then, how does dimming work? Isn't it done by changing the frequency?
__________________
Matt.
  #6  
Old 01/09/2008, 07:15 PM
H20ENG H20ENG is offline
Ozone Sniffer
 
Join Date: Jul 2002
Location: NORCAL (Vacaville, CA)
Posts: 4,395
Flourescent dimming is done at the ballast, and uses its own special wall or computer control. The only flourescents on dimmers that I have worked with have been Lutron (and they are damned expensive!!).

I believe they cut the current, but keep the filaments hot so the arc stays on, even when turned down low. Not sure about the frequency or voltage. They definitely stay the same color (to my eye anyway), but simply dim down like halogens.

http://www.lutron.com/CMS400/WorkAre....aspx?id=10055
__________________
"Not cheap, but silent and absofrickenlutely no bubbles"

"Be sure and wear a speedo lest tangs nest in your britches"
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 08:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef Central™ Reef Central, LLC. Copyright ©1999-2009