|
#26
|
|||
|
|||
i was wondering were you baught this from because i was looking for one myself
__________________
Save the cheerleader, Save the world Steve Messmer |
#27
|
|||
|
|||
Well the system is hooked up...
The Triple ZERO TDS reading is after about 60 gallons of production... so much for the 25 gallon theory. Inbound TDS is between 140 and 45, it bounces around a bit, interesting that. I also found some interesting reading about silicates in tap water, seems that they are not worth worrying about. http://advancedaquarist.com/issues/jan2003/feature.htm I'll let you all know how long it is before I have to do the first recharge. So far so good.
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#28
|
|||
|
|||
with input tds between 680 - 760, i ran around 300 gallons before my first recharge, actually, the product water was up to 19 tds by 300 gallons.
after i installed an RO, i have input tds between 5 - 6 and i get well over 6,000 gallons through the di.
__________________
success is the ability to go from one failure to the next with no loss of enthusiasm |
#29
|
|||
|
|||
I get about 2,000 gallons before a recharge out of the #10 set when using a 0.5 micron carbon block prefilter and incoming TDS around 200.
__________________
Steven Pro, yep that is my real name. 19th Annual Marine Aquarium Conference of North America (MACNA) in Pittsburgh, PA September 14-16, 2007 |
#30
|
|||
|
|||
I am up to 130 gallons and still 000 on the TDS meter.
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#31
|
|||
|
|||
war daddy keep track of how much you get this first go-round and compare to what you get after regenning the resins once. I am just curiuos to see if there is a noticable drop in tds removal before needing to be regened
__________________
Why isnt my dollar worth a dollar |
#32
|
|||
|
|||
Will Do...
Squeezed another 50 out of it... up to about 230 gallons, still at 000
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#33
|
|||
|
|||
Upadate: 340 gallons and still Trip Zeros!
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#34
|
|||
|
|||
thanks for the update. I wonder at what gallon usage you will start to see 1tds?and.... will it reach that level again after the first regen?
__________________
Why isnt my dollar worth a dollar |
#35
|
|||
|
|||
spectrapure refuses to help me with recharging DI's
so my question is ... what are you using? im adding two 20 inch di towers after my ro unit and want to be able to recharge them
__________________
Addicted to the Reef Chris "to many tanks not enough r/o" |
#36
|
|||
|
|||
do you have seperate Kati and Ani resins?
if so I can sen you info...
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#37
|
|||
|
|||
well i will soon
gonna get 1 pound of each from spectrapure. they just wont tell me how to regenerate it because they say its to dangourus
__________________
Addicted to the Reef Chris "to many tanks not enough r/o" |
#38
|
|||
|
|||
lol... that is funny
yea, hard core chemicals...bad fumes, but be smart. PM me your e-mail and I will send you the docs I have on it.
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#39
|
|||
|
|||
I am now closing in on 1500 gallons, still trip zeros!
Best part is that I am running at a rate of around 40 gph, and still got CLEAN water out. Good system this!
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#40
|
|||
|
|||
I just ordered my Kati/Ani from germany. I currently have a 2600 gallon per day Ro and an tired of wasting so much water. I am going to start with one unit and see about maybe getting 1 or 2 more. I have done some cost sheets and I think it will cost about the same to a little less without wasting tons of water.
__________________
Law of Coral Shopping If you don't buy it when you first see it, It won't be there when you come back. |
#41
|
|||
|
|||
Redox,
If you can get the resins in bulk, any reason not to build one of these units vs buying one from Germany? Does the resin change color or can you simply use a commercial filter housing? It seems I could build one pretty bulletproof for what the real units cost. Or am I way off base here?? Thanks guys
__________________
"Not cheap, but silent and absofrickenlutely no bubbles" "Be sure and wear a speedo lest tangs nest in your britches" |
#42
|
|||
|
|||
Hey Chris yes that is very doable. You can buy bulk resins pretty cheap and get yourself two fiberglass mineral tanks followed by a tds meter and there you have it. I think you could make 2 setups for the cost of one of the german units and have way more capacity
__________________
Why isnt my dollar worth a dollar |
#43
|
|||
|
|||
Just remember, all resins are not created equal. There are resins out there that are not nearly as good as others. With resins, you get what you pay for.
__________________
--Bryan I Brake for FRAGS! Tampa Bay Reef Club |
#44
|
|||
|
|||
Thanks guys.
I still have my old water softener tanks. I knew I saved them for a reason
__________________
"Not cheap, but silent and absofrickenlutely no bubbles" "Be sure and wear a speedo lest tangs nest in your britches" |
|
|