FS: custom so cal sump and Tunze 6200

ninersrule1 · #1 04/29/2007, 11:21 PM

I have a custom sump built by so cal creations. It is like new, dimensions are like 23.5 x 16 x 16 or around there. It has a refugium section and a skimmer section separated by a couple of baffles as well as a section for overflow return with baffles to reduce microbubbles. Made of acrylic of course. I bought it used from another reefer but decided to go with a larger sump. $125 for the sump.

I also have a couple of Tunze 6200s that are about 5 months old. I need to clean them out but they are working perfect and will look like new once I remove the coraline

$400 each. Rather sell them together, but if I have two buyers for one I can do that too.
I am selling because I have enough flow since I am switching to the tunze on wavysea.

PM me if interested.

sdaousa · #2 04/30/2007, 12:37 AM

Do you have a magnet for tunze 6200?

gregm5 · #3 04/30/2007, 02:49 AM

i may be interested in the sump, where are you located?

ninersrule1 · #4 05/03/2007, 09:34 AM

Sorry guys, busy week. Pumps have the bigger tunze magnets yes, I guess i can unload them as well.

Still have the sump, located in thousand oaks/simi area.

tjh · #5 05/03/2007, 11:42 AM

pm sent

laverda · #6 05/04/2007, 01:02 AM

Do you have a picture of the sump ? Any holes in it?

ninersrule1 · #7 05/07/2007, 11:18 PM

Here are some pics of the sump

ninersrule1 · #8 05/07/2007, 11:22 PM

btw, the tunzes are sold.

ninersrule1 · #9 05/08/2007, 08:38 PM

bump.

Jar*Head · #10 05/08/2007, 09:20 PM

Wow, that is a huge sump. How many gallon is it?

ninersrule1 · #11 05/08/2007, 11:00 PM

Steve you need to have your eyes checked

It measure 23.5 long by I think 16 x 16in.. around 25-30gals I think.

Jar*Head · #12 05/08/2007, 11:35 PM

Look like it twice as big as my sump hehehehehehe J/K

socalchris · #13 05/09/2007, 04:33 PM

hey your PM inbox is full. where are you located? i am very interested. i just want to measure the dimensions inside my stand to see if this will work. i will take measurements tonight after work. please PM me with location. thanks

ninersrule1 · #14 05/09/2007, 10:43 PM

my bad my bad, PM box cleared. PM sent socalchris.

ninersrule1 · #15 05/11/2007, 12:06 AM

still no word socalchris, you still interested?
I need to unload this thing.

ninersrule1 · #16 05/11/2007, 09:16 PM

bump...nobody needs a socalcreations sump?

Pepbill · #17 05/12/2007, 11:16 AM

what size bulkhead is that?

ninersrule1 · #18 05/12/2007, 03:52 PM

1 inch

ninersrule1 · #19 05/13/2007, 10:50 AM

bump.

ninersrule1 · #20 05/15/2007, 12:18 AM

bump, its gotta sell one of these days.

ninersrule1 · #21 05/20/2007, 04:32 PM

Ok, the tunze 6200 are gone, but I have a 6100 I traded for that is available still, as well as a white wavysea, but you guys have seen that in my other post.

For now, this sump has to go, simply taking too much room in my garage. I paid $250 for it.

First $100 takes it. PM me for paypal info:

Its made by socalcreations, has probe holders built in, measure 23.5 L x 16in w x 16in tall.

Its a 1inch bulkhead on there, but can be reduced to any size, or we can increase it to a larger size if need be, but really, 1inch is max I would do because you cannot pass anymore flow that that through this sump without microbubbles.

ninersrule1 · #22 06/06/2007, 11:29 PM

sump still available.