|
#1
|
|||
|
|||
rcmike's frags and equipment
I wasn't planning on bringing anything since I don't have a whole lot to bring but I figured I would throw these out there if anyone is interested.
Neon green candy cane- $15 several available ORA rose milli (is more pink in my tank)-$15 only one or maybe two frags. Purple acro - $15 2 available Unknown acro - $10 3 or 4 available Yellow Acro - $15 3 or 4 available Orange Cap - $15 3 or 4 available Turbinaria - $10 lots avialable I also have Remora Pro skimmer with prefilter box for $40. The collection cup is cracked and the prefilter box is cracked but it still works like normal Watts Zero Waste RO retrofit $100. It has a booster pump and solenoid valve. I believe it has almost everything to hook it up but I will have to check. It does need some RO tubing. You could even just use the booster pump if your pressure needs boosting. It really helped my RO production since the city water pressure was low. Since I drilled a well I have plenty of pressure and don't need it. http://www.wattspremier.com/watts/sh...ID=121&CATID=1 Tsunami wavemaker - $60 I lost the night sensor for it but I never used it anyway. I will try to find it. Has been sitting in the basement getting dirty but was really only used for probably 6 months. Milwaukee pH controller. - $40 Comes without probe, you will need to buy one.
__________________
Michael |
#2
|
|||
|
|||
Note: These will be unmounted but I can mount them to a piece of rock if wanted.
__________________
Michael |
#3
|
|||
|
|||
im interested in the skimmer.....can you send me a link to the one you have?.....any pics of the cracks, and what pump does it come with?
__________________
-john |
#4
|
|||
|
|||
A dab of weld on and it will patch it right up John. Great price!
__________________
I wish krogers sold corals so I could hide my habit in the grocery bill Don't judge me because I can't spell. I use my brain space for more important things, like thinking of a fancy user name |
#5
|
|||
|
|||
It is this one. http://www.marinedepot.com/ps_ViewIt...ct~AC3121.html
As far as the cracks go the one in the prefilter box it doesn't really affect the performance at all. I did patch it up with some CA to try and keep it from cracking more. The collection cup lid is also slightly warped from being too close to my lights (probably why the cup is cracked as well). The collection cup doesn't leak but if you are worried about it you can get a replacement one here. http://www.marineandreef.com/shoppro...mers_aquac.htm It doesn't come with a pump. I used a Mag 3 and it worked great. I'll try and get some pictures for you. It isn't the prettiest but it works well.
__________________
Michael |
#6
|
|||
|
|||
put me in line for the skimme please.
|
#7
|
|||
|
|||
i'll take it....see ya at the swap!
__________________
-john |
#8
|
|||
|
|||
Okay, here are the skimmer pictures.
Here is the collection cup. I forgot that I heated up the lid and straitened it out. Unfortunately I got it too hot and bubbled up the top. Also the O ring is cracking so that may need to be replaced soon. Here is the surface skimmer. I noticed that there is some stress cracks popping up on the bottom as well. They are hard to see in the picture. Also got some pictures of the controller and the wavemaker
__________________
Michael |
#9
|
|||
|
|||
i think i will have to pass mike.....i was planning on having it as a hang-on setup....and the crack on the bottom looks like it might go....if i was seting up a in-sum setup, i would be all over this still.....good luck with the sale though!
__________________
-john |
#10
|
|||
|
|||
wait, i think i might have read this wrong....is the crack on the bottom of the skimmer itself or the surface skimmer box?.......if its just surface skimmer.....i will still take it!!!...it'll be perfect for my 46gal bowfront
__________________
-john |
#11
|
|||
|
|||
It is the surface skimmer that has the crack. The skimmer itself doesn't have any cracks in it, just the surface skimmer and collection cup. Just a tip if you have an autotopoff of some sort. I used to have the float switch to my topoff inside the surface skimmer and it would keep the water level very constant.
__________________
Michael |
#12
|
|||
|
|||
sweet!....i'll take it.....thanks mike
__________________
-john |
#13
|
|||
|
|||
Hey Mike I need some CC and a Orange Cap if ya dont mind saving them for me !
__________________
I need to start moding my truck again. It was so much cheaper than this hobby ! |
#14
|
|||
|
|||
No problem at all. I'll bring you some.
__________________
Michael |
#15
|
|||
|
|||
I also have a couple of frags from this Christmas favia that I accidentally made when the rock broke while fragging a piece off of it. They are a couple of full polyps and a few half polyps each. $20
__________________
Michael |
#16
|
|||
|
|||
hey mike do you know of the wavemaker will work with the korila powerheads? Also on your Xmas favia is it tan and green? I have 1 also but its red and green. How big a frag of the do you have. I may want some.
__________________
I got a Iphone & its tight as hell. |
#17
|
|||
|
|||
I think it will work with korila powerheads but it will probably shorten the life of them. They may chatter some when starting up too. The favia is red and green but the red isn't quite as bright as when I got it. I think it is my lighting really. It is brighter than the picture looks though. I'll try and get some pictures of the frags.
__________________
Michael |
#18
|
|||
|
|||
Here are the frags of the Favia
How bout the one on the left $10 and the one on the right $15. One is bigger than the other. Also I have a few Candy Cane colonies like above and would sell a whole colony with 30+ polyps for $50
__________________
Michael |
|
|