|
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Go Big OR Go Home! Construction of a 1000 gallon System!!
Well, I always went by the philosophy of "Go Big OR Go Home"!
I have decided to do just that with my new tank. The whole system will be approximately 1000 gallons. With a main display tank at L-120, W-48, H-30. I will have 3 sumps, one for equipment, one for coral propagation, and one refugium. The tank has been planned and designed for the last year with help from some good, and experienced friends in the business. The tank will be an in-wall, with a very "large" fish room. The tank is going in my family room wall that is two stories tall. So, it will look awesome with the design I have planned. I decided to get my tank from Derek at Miracles Aquariums, and what a pleasure it has been so far dealing with them. I have complete confidence in the quality tank I will be getting from them. The tank is already under construction, and Derek has sent me some pictures. It should be ready in a few weeks. I have already started construction on the new fish room and tank stand. I torn down all the drywall and ran my own electrical. So, I have added all the 120 and 240 volt outlets that I could possible need. I have also designed a stand that will hold the 4 tons of weight. The stand was designed and engineered to withstand the weight, and then some!! And, yes I am on a slab. I plan on going with the same lay-out of stand/plywood/self-leveling cement/and stro-foam. I have done this in the past with my current tank with great success. I have enclosed a few pictures for viewing. |
#2
|
|||
|
|||
looking good.... gotta flollow this one!
__________________
Would it be the same if I emptied a bag of money into a glass box? |
#3
|
|||
|
|||
Looking good. Miracle Aquariums does good work. Mine is 76"Lx48"Dx25"T and came out great. Hope you have lots of help to lift that bad boy. I used 10 people on mine.
__________________
Steve |
#4
|
|||
|
|||
taggin along
|
#5
|
|||
|
|||
i'll be watching this one.
__________________
Guns don't kill people, Chuck Norris kills people. |
#6
|
|||
|
|||
That stand is rediculously overbuilt and completely awesome at the same time
|
#7
|
|||
|
|||
Personally I think a steel stand (pvc coated) with 6 legs would've have been the way to go.
No warping issues in time, and would have allowed you to use the space underneath. Having said that, the stand looks pretty good though! If that bottom pic is of your external overflows, than you certainly do live by your philosophy! Might be worthwhile attaching a platform around the back and sides of your tank that you can walk on, and reach into the tank from. 18"wide is all you need, and saves having to move a ladder each time. Is that 1" glass? |
#8
|
|||
|
|||
Re: Go Big OR Go Home! Construction of a 1000 gallon System!!
Quote:
__________________
Arguing with ignorant people is an exercise in futility. They will bring you down to their level and once there they will beat you with their overwhelming experience. |
#9
|
|||
|
|||
wow ..........that stand is heavy duty
__________________
www.5dollarthrill.com My new music project! COMING 2008: CATCH THE CRASE part 2 COMAS Social Directors |
#10
|
|||
|
|||
can't wait to see how this develops
__________________
Have you thanked your Diatoms Today! |
#11
|
|||
|
|||
massman
I thought about having a metal stand built. But, with the uneven cement and there is a header on the front legs that is about 1" higher then the rest of the cement. The metal stand would of been uneven and it would of had to been wedged to make level. Also, space really isn't a concern, plus I really don't like stuff under the tank; hard to get too. I wanted something to distribute the weight over a large area. Derek recommended a 4x4 every 2 feet, I also believe this to be a good way to distribute the weight over a large area. I am planning on making a walkway on all 3 sides for easy access to the tank. The lights will be retractable and will be on a rail so that I can push them back to work on the tank. Bigred How hard was it to lift the tank. Derek is delivering mine, so I can use his glass suction cups. I plan on 7 guys, 2 on each side and 3 in the back. |
#12
|
|||
|
|||
You are going to need some SERIOUS flow for that bad boy! What are your plans?
Can't wait to see it in person! Tim |
#13
|
|||
|
|||
what type of tank are you going for? SPS, reef, FOWLR?
Nick |
#14
|
|||
|
|||
Quote:
__________________
Arguing with ignorant people is an exercise in futility. They will bring you down to their level and once there they will beat you with their overwhelming experience. |
#15
|
|||
|
|||
BigReef
I did close loops on my current tank and I see some disadvantages with them compared to Tunze Streams. Therefore, I am going with no closed loops and about 6 - 8 tunze streams. I will also have 5 1" sea swirls for sump return. I feel that this will give me more then enough flow. nbd13 It will be a reef tank with mainly SPS, a lot of fish. I already have most of my fish in my current tank. I plan on adding a few more tangs, wrasses, and some other anthias. dgasmd That is what I was afraid of! I guess I will need more people. All the muscle that will be needed is to lift it about 1 - 2 feet up and then over to the stand. So, minimal lifting is the key here. I will be putting out an request for any "big" reefers in my area to come and give a hand. Ofcourse free beer and pizza!! |
#16
|
|||
|
|||
good idea on the tunze for flow.
CL's are over-rated on really large tank. the amount of electricity to run all the pumps on a CL is scary and then bulkhead riddle bottom panels are even more scary =) how many viewable sides will that tank have? what kind of lighting do you have in mind so far?
__________________
Dave |
#17
|
|||
|
|||
Large Polyp Dave
Thanks for the comments. I agree with the Tunze Streams over CL. Since the tank is in-wall it will only be viewable from the front. The sides and back panel will be in black. The lighting will be: 5 luminarc III reflectors with XM 10k 400 watt bulbs, and then Actinic lights along the front and back. |
#18
|
|||
|
|||
Bstone how are you going to get the sides and back in black? Also I just moved my tank which is 96*42*30T and I had 10 people to move it. It was no problem what so ever I think I would be fine with 8 people. Good luck with this.
__________________
125G ACRILIC TANK, 15G SUMP, 4.5-5" DSB, 40LBS BASE ROCK, 110LBS LIVE FIJI ROCK, 2X175W MH, 2x40W VHO, GEN X40 PUMP, RED SEA SKIMMER UP TO 250G, 2x300W HEATERS. |
#19
|
|||
|
|||
tomasz
The builder is somehow making the sides and back panel in black. I don't know how they do that with glass! |
#20
|
|||
|
|||
Fair enough about the stand, although every single one of my metal stands have always been built with adjustable feet. (I would put them on the wooden ones too!)
There is a solution that is available that is mixed in with paint allowing it to stick to glass beautifully. It's pretty popular here not for tanks but for feature walls, kitchen splashbacks, countertops etc etc. |
#21
|
|||
|
|||
Quote:
1. They will just paint it over with black paint 2. They wll use a black thick film over the glass itself. I have seen it done both ways and honestly looking from the inside of the tank you can tell which is which.
__________________
Arguing with ignorant people is an exercise in futility. They will bring you down to their level and once there they will beat you with their overwhelming experience. |
#22
|
|||
|
|||
Quote:
I would be curious to see how you would go about installing adjustable feet on a wood stand. I have thought about doing this, however I feel with the wood stand that their is a chance the feet could eventually "Sink" into the wood causing the tank to become unlevel. Any suggestions? Especially on something this big. |
#23
|
|||
|
|||
I have seen this done with the feet bolted onto metal end caps on the base of the legs.
The end caps were fitted by stirrups that ran up about 4" on all 4 sides of the legs with 3 screws on each of the stirrups. Can you follow my crappy description? |
#24
|
|||
|
|||
Quote:
Keep the pics. coming bstone: Do you plan on going BB, DSB, or Shallow sand-bed? Also curious where the sump will sit in relation to the main display tank? Thanks |
#25
|
|||
|
|||
sixxer
I plan on a shallow sand bed, and then one of my sumps will have a deep sand bed. The sumps will be on the other side of the room. I will post some pictures that shows the rest of the room in a few days. The chiller will be outside, therefore I will have to drill holes in the brick for the tubing. |
|
|