1 minute interval timer for kalkreactor

VaderWS6 · #1 12/09/2007, 02:04 PM

I've been looking everywhere for a timer I can use on my kalkreactor pump that will turn it on at 1 minute intervals. All I can find is a 15 minute interval timer. Can someone post a link to a 1 minute interval timer I can buy on the net? Thanks!

datablitz · #2 12/09/2007, 02:21 PM

most digital timers can be set by the minute

gastone · #3 12/09/2007, 02:34 PM

I use this one:

http://www.dtpetsupplies.com/catalog...ermatic-DT11C/

You may be able to find it cheaper with some searching.

G.

sjm817 · #4 12/09/2007, 02:35 PM

Get a digital timer and be sure it has a built in battery backup to hold the programming.

VaderWS6 · #5 12/09/2007, 05:10 PM

I ordered this one digital timer

VaderWS6 · #6 12/14/2007, 10:43 PM

Quote:

Originally posted by gastone
I use this one:

http://www.dtpetsupplies.com/catalog...ermatic-DT11C/

You may be able to find it cheaper with some searching.

G.

Can you set that one at 1 minute, up to 8 times per day?

sjm817 · #7 12/14/2007, 11:35 PM

I used to use this one.
http://www.amazon.com/Timex-L12-871-.../dp/B00013K2SG
It can do 20 timers per day, 1 min minimum, built in battery backup. I got it at Target.

gastone · #8 12/15/2007, 01:01 PM

It does up to 14 on/off cycles per day. I got tired up inputing them after I had done 8 or 9. I figure every 3 hours is fine for me.

Garrett.