|
#1
|
|||
|
|||
150 frag Tank
Here is my new frag tank
This was done on the cheap Its 72" long 24" wide 20" deep. Somewhere around 150 gallons. it took a sheet and a 1/2 of 1/2inch plywood The framing under is 1x3. The liner is 40 mil I got off e-bay. Total cost less then $50.00 The tank is doing the drip and shake down test. Its been set up for 3 days now. No problems so far. |
#2
|
|||
|
|||
Sweet stuff!!! Do you plumb bulkheads through the liner??
__________________
~Team Arctic Cat~ Let it snow, I have a hobby to pay for!!! |
#3
|
|||
|
|||
I guess you could figure something out.
The plus side to a tank like this is that you an build it to what ever size or shape you need. It simple to build. |
#4
|
|||
|
|||
that's awesome but scares the hell out of me. good luck.
__________________
CTARS Vice President. |
#5
|
|||
|
|||
You can plumb bulkheads through liners. They do it in pond construction all of the time. Especiall with the plywood yo secure on the outside.
__________________
When in doubt ride a bike. |
#6
|
|||
|
|||
Thanks Jerryz for sharing that helpful information...I am not a liner fan, but if I ever tried a pond, I may use one.
__________________
~Team Arctic Cat~ Let it snow, I have a hobby to pay for!!! |
Thread Tools | Search this Thread |
Display Modes | |
|
|