|
#1
|
|||
|
|||
Help with new sump setup
Hey Everyone! This is now going to be my second attempt on setting up a sump below my 55g. The first was a nightmare and I could never get the flow rates right, so I always ended up either taking too much water out of my 55 or too much out of the sump. Here is my current setup for this latest project:
*CPR Aquafuge Pro - (Located exactly under 55 in cabinet) *CPR Continuous Siphon Overflow Model# CS50 (Rated 300GPH w/ 3/4" bulkhead) *Eheim 1250 Pump Now I have nothing right now to conenct everything together. I tried doing this with a homemade tank and a pump before, and well, you know the story. If anyone could take a couple minutes to tell me exactly what I need as far a connections go and how to get this working I'll be happier and a pig in sh*t |
#2
|
|||
|
|||
check valve.
place sump above tank like me. ha! |
Thread Tools | Search this Thread |
Display Modes | |
|
|