|
#76
|
|||
|
|||
Okay Sally....if the skimmer really isn't working properly, then it's not getting all the bad crap out of the tank which in turn could be a big part of your nitrate problems. Once you get it working or another one that works well, and get a good supply of chaeto going, they'll drop drastically. So don't take it out on Brett....he didn't make the skimmer not work.
__________________
Pat |
#77
|
|||
|
|||
Quote:
|
#78
|
|||
|
|||
that run is so verticle - nevermind organization just right now use a long piece run it right then back left - let the water slow down and then work on baffling it at the end like I am trying to show - mine is behind opaque acrylic so I can't show you
is that pic the most recent one - your outlet hose is completely submerged - heck even getting it out and letting it hit agaist the side of your sump will disa pate the noise how many gph are you running why is your water level so high - does your aqua c dictate that? do you have a cover over the area your water is dumping in to - I can not tell - looks like not when you get your water falling more gently many of your bubbles will go away on your skimmer , do you have an air-in hose - drop some water in it and let it clear is so or put your thumb over the hole - where is the wistle coming from you need SLIME [QUOTE]Originally posted by drk70 [B]Here are the pics I posted earlier.
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#79
|
|||
|
|||
my thoughts are to keep the fuge light on 24/7 for a while - so 15 gallon water change, look for something not doing well or dead and if the skimmer works, skim wet
how is your water flow inside the tank - maybe put a sock on your outflow and turn up water flow full blast to shake up anything maybe even blast your rocks, etc by holding ph and aiming to some controlled extent so you don't blast your lovelies to heck, let the sock catch it and remove the sock when the water clears stuff that needs light is not getting enough inside the tank imo - Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#80
|
|||
|
|||
Sally I just tripped over your threads with Ron - he gives good advise run the fuge 24/7 and tune the skimmer to make the bubble level rise somehow - even try to get it to skim wet - I can;t see a skimmer adding to the problem, just not helping it - yuou neede to export the nitrate causing stuff - you sand bed is not mature enough to help that much yet
where can I get chaeto online can't find it here Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#81
|
|||
|
|||
Quote:
Bought the chaeto through www.macro-algae.com. Chris was awesome. They only take pay pal so if you don't have an account, e-mail Chris and see if he can work with you. His website would only order one batch, we wanted two. We e-mailed him and worked it out through e-mail. Ordered on Thursday, got it Saturday and great shape. It's now sitting, stuffed in the fuge. I truly think we are going to need to purchase a new skimmer. We are very upset as ever since we started putting our tank together, we have run into problems that the lfs caused. We counted on their expert advise and almost every step of the way we have encountered problems. We were given a quote of about $3500 for complete set up of a 150g. We are now over $8000 and still going. It's not the money, it's the frustration of having to replace, add on to, and trash things that we paid for that were supposed to be exactly what we needed. |
#82
|
|||
|
|||
Quote:
I don't know. The overflow is suppose to handle 600 GPH and I have a Mag 9.5 with maybe 4' of head but I open the valve to slow the flow into the tank. I have a cover that covers half of that area and a piece that goes about 8" down so the water has to go under it. I have about 11" of water in the skimmer section. the skimmer has to be in around 9" of water and I have it raised up some. If I put my thumb over the air intake it shuts right up.
__________________
Dennis |
#83
|
|||
|
|||
Quote:
Lighting - 4 lines.....320 watts vho blue, 200 watts pc blue, same watts for the whites for a total of 1040 watts. We are still gradually building all of this up. VHO's are running full cycle 12 hours whites and 14 hrs blues. PC's are still coming up to speed. We had a brown algae bloom that TBS recommended we keep lights low for a period. In fact, other than turning the fuge on 24/7, we have been doing everything that everyone recommends and more. |
#84
|
|||
|
|||
I used a 90 to make this happen on mince to avoid the kink - why are you and I the only ones who do not use vacuum hose - are we stubborn?
I would just put a 90 at the end of the current hose after aiming it right and use the 90 to get back to the place you want to be left - I don't feel you need to start working with the pvc again. I did expand to 1.5 at some point - the water should have a clear path (not build up anywhere along the run to where it starts burping - the 90 should go a long way to start the slowing down without building up - its funny sometimes slowing down the water flow a little makes a big difference - I didn't think it harmed mags to apply a valve post return like it does some pumps A tank like flow, but many try not to tax the sump workings to make this flow when it makes the skimmer less efficient anyway - they use ph's or closed loop - I think its sort of counterproductive and makes things harders sometimes to get all the water you can over the overflow - creating niragra falls noise and does not let the skimmer have enough time on the water YOU WILL have microbubbles galore until you start getting lige in there and slimed up - you have nothing right? seriously slime makes micro bubbles go away - you have next to no slime - when are you getting your tbs? I meant stop/start air flicking it thinking there was something - a bubble or something caught making the whistle - shake it loose or drip water into the air intake to clear it maybe its dried salt water in which case warn ro/di water to dissolve it - although I don't know where its coming from and don't know your skimmer - its just that something is causing it and therefore that something can go away and it ain't rocket science just experimentation Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#85
|
|||
|
|||
ps hose below issue - until you get the stream tweaked you have lots of air to manage as part and this will make bubbles - until you start to get a handle at the surface a little under a little less above the waterline
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#86
|
|||
|
|||
Quote:
If I put 90 on the flex then I have to put threaded adapter on them and then a barb fitting. I would think it would be easier to just use all PVC. I have no slime. No anything. Your guess is as good as mine on the TBS. When they call I will get it.
__________________
Dennis |
#87
|
|||
|
|||
well here we go ETA is 1 week till the big move, i'll be picking up the new custom stand tomorrow, i prewired the new house allready, i'm setting up a temp 20g tank (will afterwards become my QT tank, and will be transporting the clownfish and goby in the next few days, sunday i have 4 guys coming to help move the tank, then i can call Richard for my second half. i will also be hooking up a calcium reactor too (new toy) and i'm fairly convinced i'm going to order tunze stream, im also ordering one of those heavy duty magnet cleaner (the magfloat doesnt cut it)
i'll keep you guys posted!!!!
__________________
Patience...... Patience.......uuuuhmm is that in the produce dept.? |
#88
|
|||
|
|||
Any pictures of a sump with a refugium with frags?
__________________
I like pie!!! |
#89
|
|||
|
|||
Quote:
|
#90
|
|||
|
|||
Pat, what happened?? You lost a star!!! Here I was thinking this is one of the most informative and helpful threads out there. Hmpf....guess someone else doesn't think so.
__________________
Research and learn BEFORE you act !!!, or you'll surely regret it. :) |
#91
|
|||
|
|||
Quote:
The house is brand new?
__________________
Pat |
#92
|
|||
|
|||
Moving is a pain in the butt! I feel for ya there, I dont look forward to moving the tanks anytime soon.
__________________
Never be too shy to ask for help |
#93
|
|||
|
|||
Quote:
__________________
Pat |
#94
|
|||
|
|||
feed pt2 for the first time last nite. what a blast! my wife went crazy when the long arms of the serpent came out of the rock and grabed the shrimp off the feeding stick. it just gets better and better.
|
#95
|
|||
|
|||
slime is well, a light coat of slime on everything in your aquarium set up except for the glass you clean - if you run your finger along the inside of your sump, your hoses - everything, you can feel the slime - it is known to really impact microbubbles in a good way - don't know the science but it is well known.
It is different than the slime of your skimmer neck which is (should be) dirty ugly smelly slime - you should clean your skimmer neck of this as - at some point it does not let the bubble build up crawl up the neck as well - but know that when you first clean the skimmer - it appears to not be bubbling up the neck as well - this is expected as you have removed the innocent slime a bit and the oil from your hands, etc also - it just needs to reslime up and it happens pretty fast in an established skimmer - did this help? Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#96
|
|||
|
|||
yes - I don't know what else to call it - btw - it comes in clear
I like to see the water running too. (for drk) Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#97
|
|||
|
|||
ok - but know that they make barbed 90's - sometimes HD or lowes, etc has them
your aquarium is empty except for life - probably why your skimmers is whistling at you "whistle, whistle - dude how can I skim when I have no protein" lol Quote:
__________________
the only time i see my firefish is when i look down.... - behind the tank |
#98
|
|||
|
|||
Dennis, you can get barbed 90s at any marine retailer (Boaters World, West Marine, etc..). i think before running your hose to the right then back to the left, just try one on the end of the hose. i agree with jnick, that you need more backflow on the drain. a 90 on the end may be enough, by itself. thats all i have on mine.
Pat, i love all the pics on the first few pages
__________________
Landon |
#99
|
|||
|
|||
Quote:
__________________
Danielle |
#100
|
|||
|
|||
Quote:
also, 3 firefish is a bad idea, unless you have a huge tank. the only way 2 will work, IMO, is by getting a male and female and adding them at the same time. as Pat pointed out, expect them to jump. if you plan to spend $150-$200 in fish, why not spend this on equipment or LR and LS? defiantly get your equipment first. lights, skimmer, water pumps, sump etc.. should all be up and running before you purchase rock and sand, which in turn comes before you buy fish and corals.
__________________
Landon |
|
|