|
#1
|
|||
|
|||
upgrading to 292+ Starphire
After several months of planning. tank has been ordered Lead time given was 2-4 upon completion. Thanks to all those who answered my questions. As I build, PLEASE feel free to make suggestions. I KNOW THAT I DON'T KNOW IT ALL.
Display Tank Dimensions: 90"x30"x25" Volume: approximately 292g Glass: 1/2" Starphire Glass made by advance aqua tanks. three overflow boxes. In each box is a 2 inch and a 1.5 inch bulkhead. overflow boxes are inside. One drain to sump and one to fuge and one go 600 gallon storage tank buried in the backyard for thermal control tank has been there for two years now during this summer the temperature maintains 78° Filtration Main Sump: 80g glass tank (48"x24"x17") Refugium: 60g glass tank (24"x24"x24") Frag Tank: 40g glass breeder tank (36"x18"x16") Water Change: 150g Quarantine: My current 180g tank (72"x24"x24") Skimmer: home G6 Calcium Reactor: Deltec PF601 Fluidized Reactor 1 Deltec FR509 Kalkwasser stirrers deltec km500s Pumps Main Pump 1: barracuda Closed Loop 2: Dart Water Change Pump: 4-MDQ-SC/MDQX-SC Display Water Movement 6x 1" Wavy Seas for the main return 2 four-way Oceans Motions for Closed Loop Lighting three 400 watt metal halide 20K Radium sunlight supply Blue Wave III 400 watt HQI 3 Lumenarc Refugium: 2x 64" Compact Florescent Stands is 1.5 inch square tube 3/16 thick. It took 12 20feet to build the stand, hood and hood supports. Powder Coated Stocking -Planning on keeping mostly SPS corals with some lps corals -Clams ControllerI think I want to go with the Neptune aquacontrooller III but I have not made up my mind yet. Any help in this category would be great. I have already purchased just about everything but life stock, a good controller |
#2
|
|||
|
|||
material arrives. Now the fun begins over I will start to assemble. figure it will take about eight hours to weld.
|
#3
|
|||
|
|||
Current Tank
|
#4
|
|||
|
|||
Over the Thanksgiving holiday . I added another Rubbermaid trash can. and I rework whole system
I installed chiller in two system. Disconnected thermal control tank for now . my wife would kill me if I drill hole in the wall . instead I went to Home Depot bought the doggie door set up for me to drill instead. |
#5
|
|||
|
|||
update today my friend Larry and I started building the stand.
|
#6
|
|||
|
|||
Nice do you think you will have enough flow?
__________________
silicone can be deadly! |
#7
|
|||
|
|||
To your questions Steve I think I will have plenty flow.
The barracuda will be on the main return. One of the darts will pull double duty for the closed loop system and another part would be for protein skimmer feeds calcium reactor. The other dart pump will feeds the nozzles underneath the rocks. |
#8
|
|||
|
|||
Quote:
The other dart pump will feeds the nozzles underneath the rocks. [/QUOTE] Is this going to be a closed loop?
__________________
I refrain from using the word "hobby". You don't refer to your dog or cat as a "hobby." |
#9
|
|||
|
|||
Dart pulling double duty is not a closed loop the split is below the check valve .
Other dart is a closed loop underneath for the rock |
#10
|
|||
|
|||
Today I finished up the top hear some new photos and started building a light rack to.
|
#11
|
|||
|
|||
I was actually joking. I think you have way more than enough flow with all those pumps.
__________________
silicone can be deadly! |
#12
|
|||
|
|||
Update on the stand . today I finished it. I finished the light rat assembled the whole thing. Here are some new photos. After the photos finish grinding the welds . off to the powder coat
power coat should take about five days to finish. Last edited by steeldeep; 12/06/2007 at 08:02 PM. |
#13
|
|||
|
|||
Beautiful!!!
Great attention to detail.
__________________
Click on my red house to see my 390 build thread. |
#14
|
|||
|
|||
that is sweet!!!!!
|
#15
|
|||
|
|||
that's one solid stand.
john
__________________
210 AGA (RR) Reef Octopus 200-NW skimmer 6x54w t5's |
#16
|
|||
|
|||
600 gallon thermal tank.. Wow.. What state do you live in?
__________________
Eric (Red House for my 425 system) |
#17
|
|||
|
|||
Quote:
__________________
Click on my red house to see my 292+ build thread. |
#18
|
|||
|
|||
What are your 3 rubber maid pails for. I am guessing 1 is for ro storage the other mixing salt but the 3rd??
__________________
Eric (Red House for my 425 system) |
#19
|
|||
|
|||
This is going to be awesome
__________________
you're ethier slinging crack rock or you gotta wicked jump shoot - boiler room |
#20
|
|||
|
|||
Quote:
__________________
Click on my red house to see my 292+ build thread. |
#21
|
|||
|
|||
I really like your stand. Outstanding job on the hood.
__________________
C-SEA President |
#22
|
|||
|
|||
today I picked up stand from powder coat . It took them four weeks to complete tomorrow I'll drop it off at the acrylic shop.
I am planning on using acrylic to enclose the stand and canopy. some new pictures tomorrow.
__________________
Click on my red house to see my 292+ build thread. |
#23
|
|||
|
|||
Good luck with the build sounds like it is gonna be sweet
|
#24
|
|||
|
|||
Are you planning to have clearance between the top of your tank and your hood? Or, will there be a an overlap that will seal the gap around the top?
__________________
C-SEA President |
|
|