paid for 2, picked one up last weekend and plan to pick up the second as soon as they have it torn down, so this weekend or the next. One will be used as a full fledged refugium, w/ the tek light over it and the second will be a sump for overflow/capacity/etc (IE: so that the system will pass the "power failure test" and not flood the garage
. I am torn about the prop setup. I originally wanted to incorporate it into the sump/fuge, but now am unsure how best to achieve that with the design ideas I have in mind. I may play around with the configuration quite a bit before I settle on the final setup. Worst case scenario I have several tanks that we can choose from to set up a separate prop tank, it just would cost a little bit more $$ to run then ($30 per month, give or take, by my calculations). But either way we have pretty much all of the hardware we will need for whatever configuration we settle on
. So basically look for alot more FS threads from us once we get this design all worked out and running
EDIT: Those FS threads will also include our previous 60g custom sump/fuge (built by a company down in So Cal somewhere), our current 100g custom sump/fuge (see my sump build thread listed towards the begining of this thread) and a 110g acrylic tank that was originally slated to be the next custom sump/fuge
. Along with at least 2 prop tanks FS (2'X2', 3'X3' and/or 2'X2.5', all 12" deep)
01/16/2007, 01:02 PM
Threaded Mode