|
#101
|
|||
|
|||
Try reading this article, which includes the section on the HOB overflow that you are trying to figure out, including how to prime it.
http://reefkeeping.com/issues/2008-01/newbie/index.php
__________________
Marc Levenson - member of DFWMAS |
#102
|
|||
|
|||
I see that the HOB overflow is the u-tube style. I used one on my 55 and had no problems with it, as long as you know it's limitations. You have to have enough water flowing through it so that any bubbles that get in the u-tube get pushed all the way through. Otherwise, they will build up and break the siphon.
flyguy's right - the box inside the fuge will determine the water level in the tank, so if you want the water level where it is now, you'll have to raise the inside box. Everything's looking good! Thank God for the helpful folks here on RC - I'm sure my living room would be an olympic pool if it weren't for some of their suggestions!
__________________
Dogs - Man's best friend; entropy's greatest catalyst. |
#103
|
|||
|
|||
Man! Everytime I see an opportunity to put in some useful info, I start typing, submit it, and then realize melev beat me to the punch!!!!!
__________________
Dogs - Man's best friend; entropy's greatest catalyst. |
#104
|
|||
|
|||
Quote:
__________________
Marc Levenson - member of DFWMAS |
#105
|
|||
|
|||
i will defintely read that article and try to call the local fish store JCpatella lol that does happen a lot but its ok its telling me that people are agreeing with other people
|
#106
|
|||
|
|||
I just read the article and i will try that later in the day have to make a little touchup to the plumbing
|
#107
|
|||
|
|||
i also found one other thing about it and i will post pics when it is up and running
|
#108
|
|||
|
|||
Ok here are is the setup next step IS TO ADD THE SALT!!!
Here is the top of the Skimmer. here is the hang-on overflow and the sump with everything running Question Does My Skimmer look like its running right?? |
#109
|
|||
|
|||
Skimmer - It won't run right until you have salt in the system.
Also, do you see that bubble in your u-tube? The flow has to be fast enough to push that out.
__________________
Dogs - Man's best friend; entropy's greatest catalyst. |
#110
|
|||
|
|||
Raise the inner box of that overflow box 3" please. Then take another picture.
You need that airbubble out of the U-tube. EDIT: Oh, it's on now! Beating me to the post. What will people think?!
__________________
Marc Levenson - member of DFWMAS |
#111
|
|||
|
|||
YESS!!!! I specifically wrote that as quickly as possible! I just needed to do it once. I'm done - you can get back to beating me again!!!!
__________________
Dogs - Man's best friend; entropy's greatest catalyst. |
#112
|
|||
|
|||
lol i will do that and i will post pics later. Do u think i should add salt all at once or at a time so i dont over do
|
#113
|
|||
|
|||
Add the correct amount in the main tank. 1/2 cup salt per gallon. Once it has had a couple of hours to mix, then test it and see how much more you need to add. I've asked you twice what salinity you wanted, but now I'll just tell ya to get it to 1.026 sg for a reef tank.
__________________
Marc Levenson - member of DFWMAS |
#114
|
|||
|
|||
oo sorry didnt see that yea i would like it around 1.025 or 1.026 and i did try moving the inside box up and it did not get rid of the bubble i will try again and see what happens i will probably be adding the salt tomorrow i will post pics.
|
#115
|
|||
|
|||
Moving the box up won't get rid of the bubble. You have to increase the flow through it. Try opening the ball valve that goes to the fuge a little more. This should help push the bubble through.
__________________
Dogs - Man's best friend; entropy's greatest catalyst. |
#116
|
|||
|
|||
ok i will try and do that
|
#117
|
|||
|
|||
ok i did try that and i got the bubble a little smaller so i will try to do it again and see if it gets it smaller. Probably going to add salt today will post pics
|
#118
|
|||
|
|||
i am going to add the salt in a little will post pics and i did mange do get the bubble very small
|
#119
|
|||
|
|||
I added the salt and everything looks good here is the sump and the fuge
And here is the tank with two bags that each make 50 gallons in the second bag i left a little in there because that would make 100 will probably test water tomorrow This is the first bag in The secong Bag |
#120
|
|||
|
|||
stir it up!
__________________
chrismunn |
#121
|
|||
|
|||
yea i will do that how long do u usally wait untill you put sand and rock in?
Also should i defintely have my light when i put in my rock and sand |
#122
|
|||
|
|||
Tagging along, by the looks of your skimmer If the water level Is high enough you might be able to raise the skimmer up another 1 or 2 inches and get the output to drain into anouther filter sock. This will disfuse any more bubbles coming out. Just my 2 cents. Nice job so far on the build, good luck
__________________
And I thought buying an puppy would be too expensive! Check out my 90G build. Click the little red house. |
#123
|
|||
|
|||
thanks the skimmer outlet is right near the sock and there is not that much bubbles
|
#124
|
|||
|
|||
looks like you're getting there Have you tested you're overflow box to make sure the siphon restarts after you shut off and on the pump??
__________________
Leo Click on my red house to see my 90g RR tank :) Tons of pictures, tons... Click!!! |
#125
|
|||
|
|||
thanks yea i did and it does so ill be fine if the pump shuts off during the night or anything
Just going to repost my ? just to get them through the thread how long do u usally wait untill you put sand and rock in? Also should i defintely have my light when i put in my rock and sand |
|
|