|
#1
|
|||
|
|||
10 Gallon DIY Perfecto/Marineland Refugium/Sump
I have 2 extra tanks for a small project I am attempting. I want to get some glass panels cut for a small refugium sump for a 30 gallon system.
The problem is I can't seem to find the dimension I am going to need for the baffles. I am curious has anyone else had these cut before? What dimensions are you using? Did it work? |
#2
|
|||
|
|||
Hmm I was toying with this too on my Aquapod, anyone done this? I would be interested as well.
|
#3
|
|||
|
|||
I bought 8X10 sheets at HD (made for picture frames) and trimmed along the side (took off about 1/16 of an inch) worked great and cost less than 20 bux for the baffels and silicone. If you have never cut glass buy a pratice peice along with the cutter and cutting oil.
|
#4
|
|||
|
|||
do you have any pics?
|
#5
|
|||
|
|||
Of the finished sump yes, of me cutting the glass no.
Here is a link to my build on another forum. http://www.captivereefing.com/showthread.php?t=4521 If it is not OK to link will a mod please remove this??? |
#6
|
|||
|
|||
Quote:
__________________
Luis |
Thread Tools | Search this Thread |
Display Modes | |
|
|