Is there a way to get rid of the 90 in the back of the AP24?

danmc00 · #1 05/29/2007, 08:55 PM

I have a MJ1200 in the back chamber, but I still don't think it is enough flow. I know the 90 elbow is slowing it down some. Is there any way to not use it? I have tried using tubing without it, but the tubing always kinks.

Zann · #2 05/29/2007, 10:18 PM

the 90 shouldnt slow it down it doesnt have any obstructions so it cant slow it down that much
the only thing i could see slowing it down would be the length of the tube in the back

i put a 1200mj in mine and it does fine i put a hydor on it though makes a big differance

shouldabenacowboy · #3 05/30/2007, 12:34 AM

I just got rid of my hydor on my MJ1200 because it kept locking up. I added another MJ900 and the combination of flow is pretty good.

SBC

Crackerballer · #4 05/30/2007, 07:32 AM

Are you running just the mj1200? I am going to be running the MJ900 and the stock pump running out at two different locations. Why not just add a 2nd pump?

danmc00 · #5 05/30/2007, 08:49 AM

I really don't want to drill any holes.

Crackerballer · #6 05/30/2007, 09:22 AM

No drilling required

danmc00 · #7 05/30/2007, 06:52 PM

Can you use that with a closed top AP?

Crackerballer · #8 05/30/2007, 06:55 PM

Oh not sure. I don't know how much clearance you have. I have the Sunpod with my AP24. Doesn't look like it sticks up more than about an inch over the wall.

shouldabenacowboy · #9 05/31/2007, 01:09 AM

I think you can as long as it is pushed all the way back....so the back of nozzle is against false wall. I believe it would give you enough clearance so it wouldn't hit the splash guard.

SBC

burke031 · #10 05/31/2007, 11:55 AM

Quote:

Originally posted by Crackerballer

No drilling required

Where did you get this ?

Crackerballer · #11 05/31/2007, 12:07 PM

http://www.drsfostersmith.com/Produc...&N=2004+113833

$4.79