|
#1
|
|||
|
|||
"Alveopora Propagation" - Need advice
I have a alveopora "Y" branching and the polyps are very dense. Lots of baby polyps sprouting out and I am concern that they may not get enuf light.
Can I saw off one of the branches and glue it to a piece of LR? If Yes, how do I go about doing that?
__________________
newbie to marine reef tank: Readings as of Oct20: 1.023 Salinity 0.0 NH4 <0.3mg/L NO2 50mg/l NO3 8.2 PH 5.0 KH 500+ Ca 78.8-80F Daily Temp |
#2
|
|||
|
|||
use a diamond dremel or something simmilar. You will lose some of the polyps at the cut line. they should regrow if conditions are good. you will also need some gel super glue to glue the cut piece to a mount. Try to cut it straight so it will be easier to glue cut away
__________________
Why isnt my dollar worth a dollar |
#3
|
|||
|
|||
Got it. Hope no other complications. I will cut them up soon.
__________________
newbie to marine reef tank: Readings as of Oct20: 1.023 Salinity 0.0 NH4 <0.3mg/L NO2 50mg/l NO3 8.2 PH 5.0 KH 500+ Ca 78.8-80F Daily Temp |
|
|