|
#1
|
|||
|
|||
How high are your halides?
How high is the "average" metal halide off of the water. I'm trying to decide if a 12" canopy will do the trick...
thanks, smariner |
#2
|
|||
|
|||
My canopy is 12", so i'd say the bottom of the bulb is about 10.5" away from the water.
All is well Angela.
__________________
36g aga corner bowfront, 15g sump, 250w de halide. |
#3
|
|||
|
|||
Thanks, I'm in the process of putting together a 360(84"(L)x32"(W)x30"(H) SPS only setup and wanted to be sure that 12" would do it... It's going to have 5 400 Watt Halides(3 6500's and 2 20K's) as well as VHO's.
|
#4
|
|||
|
|||
I have my halides 7" above the top of a 180g bowfront.
|
#5
|
|||
|
|||
Mine are 9" off the water.
HTH, Kevin
__________________
SPS Guy I owe I owe so off to frag I go. On - On |
#6
|
|||
|
|||
On mine the lamp center is 6" from the surface of the water.
|
#7
|
|||
|
|||
fcam44: You have heat problems w/ them at close? Anyone else running that close in a canopy? I assume that you have an appx 10" canopy?
thanks... |
#8
|
|||
|
|||
I'm re-doing the tank now but when it was running I just had 2 big fans off the back blowing around...between the airflow and evaporation I was fine.
|
#9
|
|||
|
|||
halides
mine are approx 8" from water hope this helps dean
|
#10
|
|||
|
|||
My mh is 6.5 inches above the water 250w on a 58 gal.
Chuck |
#11
|
|||
|
|||
Mine are 3" away from the water surface
__________________
Regards, Mike |
#12
|
|||
|
|||
JerseyReef - What kind of wattage lights do you have. 3" huh? Seems really close!
|
#13
|
|||
|
|||
I have a 12" canopy and my 250 watt halides are about 7" off the surface of the water.
Bender |
#14
|
|||
|
|||
Woohoo, I can finally participate in MH conversations! I just got my hanging canopy for my 29 put together.. I've got a 250w Iwasaki suspended about 9" from the water level. Man, what a difference compared to VHO's
|
#15
|
|||
|
|||
My 250s are 2" off the water.
|
#16
|
|||
|
|||
My 175 MH's are kept about ten inches off the water. Wen it was closer my tank temp went up alot.
|
#17
|
|||
|
|||
250w HQI
8" from surface |
#18
|
|||
|
|||
The height really depends on:
your tank depth your MH wattage heat problem? I am having a very shallow (~16") tank, I hang my 2x150 HQI above my open-top tank approximately 12 inches. |
#19
|
|||
|
|||
2 x 400w MH 6.5k Iwasaki
2 x 400w HQI 20K Radium 10 inches from water surface
__________________
Ab uno disce omnes. |
|
|