|
#1
|
|||
|
|||
OT can you bend pipe?
ok.. for real... can anyone bend a 2" galvanized pipe? I need a 62degree bend made...
thx
__________________
Gabriel Want to see my tank? click on my Red House.. |
#2
|
|||
|
|||
I have absolutely no idea, but maybe you can check with a well-equipped muffler shop.
__________________
Kelly |
#3
|
|||
|
|||
Take it to a muffler shop or a fabrication shop if you don't find someone to do it for you.
__________________
Save the Reef........................... Save the world. -Ken MASLAC member |
#4
|
|||
|
|||
I would say loc01 can do it
|
#5
|
|||
|
|||
I can LAY pipe...
Oh, wait. You were serious... :P If all else fails I'm sure I could get it done for you, but that would be out towards the Ontario area... ??? Is it thin wall? Standard electrical type (thicker walls)? ????
__________________
If you can't do something right... Be an IT consultant! |
#6
|
|||
|
|||
Walk into a plumbing or muffler shop and they should be able to bend it, just as long as its not too too short.
__________________
You want HOW MUCH for that colored stick?!!! A fool and his money are soon fragged. |
#7
|
|||
|
|||
to bend 2" GRC for a service riser requires a hydrolic bender, I can bend up to 1" GRC or 1 1/4" EMT by hand. if you have an account, you can order it bent from your local electrical supply house
__________________
A free people ought not only to be armed and disciplined but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them G.Washington |
#8
|
|||
|
|||
Hey bebo77 I can have it bent at work but I live in redondo beach not sure if you want to make the drive.
__________________
Raymond Last edited by rjd; 12/12/2007 at 12:23 AM. |
#9
|
|||
|
|||
Quote:
__________________
Gabriel Want to see my tank? click on my Red House.. |
#10
|
|||
|
|||
bump
__________________
Gabriel Want to see my tank? click on my Red House.. |
#11
|
|||
|
|||
Maybe ask this guy:
|
#12
|
|||
|
|||
thats not 2" galvanized pipe...
__________________
Gabriel Want to see my tank? click on my Red House.. |
#13
|
|||
|
|||
thats 2.5
|
#14
|
|||
|
|||
I am fairly certain IMS (Industrial Metal Supply) has hydraulic roll benders that can handle 2" galvanized. The LA location is just north of Burbank. A single simple bend should not cost that much.
|
#15
|
|||
|
|||
thanks.. i found a place in Azuza that will do it for $50... all they do is bend pipe...
__________________
Gabriel Want to see my tank? click on my Red House.. |
#16
|
|||
|
|||
Quote:
I'm in the wrong business!
__________________
If you can't do something right... Be an IT consultant! |
#17
|
|||
|
|||
lol... yup.. i found 2 other places but they wanted over $100 cant do it by hand.. so i really have no other option..
by the way.. if you want to make good money.. install/ fabricate granite counter tops.. those guys make BANK and dont really do anything...
__________________
Gabriel Want to see my tank? click on my Red House.. |
#18
|
|||
|
|||
Chuck Norris can bend pipe just by telling it to bend.
__________________
Ed "Get Busy Living Or Get Busy Dying" "Were discussing man,...you have your wrong opinion i have my right one. Its called communication." Mac Inger |
#19
|
|||
|
|||
I bet Bill can do it!
__________________
hmm, there are admissions that this is a public forum..... |
#20
|
|||
|
|||
Quote:
(Images of that movie Scanners flash in my head) Dunno about a hydraulic bender, but I hear he's pretty handy with a chain saw...
__________________
If you can't do something right... Be an IT consultant! |
#21
|
|||
|
|||
Quote:
http://www.youtube.com/watch?v=MDUQW8LUMs8 Gotta admit it's nice to see someone not taking themselves too seriously...
__________________
If you can't do something right... Be an IT consultant! |
#22
|
|||
|
|||
Quote:
__________________
hmm, there are admissions that this is a public forum..... |
#23
|
|||
|
|||
Quote:
$50 is cheep, do you have any idea how much that machine cost? or how much you have topay a pipfitter to run it?
__________________
A free people ought not only to be armed and disciplined but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them G.Washington |
#24
|
|||
|
|||
i own a shop, if you want to do it cheap and are hands on, buy a bender from Harbor Frieght (cheap I know) but for$50 you could buy a bender that has a die for up to 2"...
Mike |
#25
|
|||
|
|||
Actually If I can meet the girl in your avatar I will fly to Ca and do it for you
Michael |
Thread Tools | Search this Thread |
Display Modes | |
|
|