|
#1
|
|||
|
|||
Does anyone have any Enkamat ?
Im looking for enough Enkamat to do two G -3 conversions. The stuff is ridiculously priced at 45.00 per sheet, or at least that is the cheapest I can find it.
If someone would be kind enough to sell me a bit I'd be grateful. Otherwise, I'll bite the bullet and buy a sheet, then list it as a tangible asset in my will. I don't mind spending money but tieing up 45.00 bucks for enough Enka to do 40 conversions iis a bit much. Thanks !
__________________
What in the name of corn on the cob is going on here ? - Buffalobunch |
#2
|
|||
|
|||
talk to skip at ATR, he had some a few months ago.
-jesse
__________________
Zoanthid Aficionado It is the mark of an educated mind to be able to entertain a thought without accepting it. -Aristotle |
#3
|
|||
|
|||
Thanks Jesse ! I was headin down there tomorrow so that will work.
__________________
What in the name of corn on the cob is going on here ? - Buffalobunch |
#4
|
|||
|
|||
If Skip doesn't have any, I've got some that would be enough to do your two G3's. Just let me know.
Mike |
#5
|
|||
|
|||
If you are doing a impeller mod, I prefer blue 3M scotch pad. I had better results.
__________________
New obsession.....zoos and now CLAMS! |
#6
|
|||
|
|||
Jay, I ran the blue Scotch guard and the Skimmer was eating the stuff. Based on the airflow tests I saw, the Enka did far better, if mod was done correctly.
Six, thank you. I'll try and hit Skip up first. If he is out, I'll come begging with hat and wallet in hand. THank you !
__________________
What in the name of corn on the cob is going on here ? - Buffalobunch |
#7
|
|||
|
|||
No need to beg or bring the wallet, just let me know.
|
#8
|
|||
|
|||
Heading down in about an hour. I'll let you know. And thank you again.
__________________
What in the name of corn on the cob is going on here ? - Buffalobunch |
|
|