|
#1
|
|||
|
|||
What are the best heaters for our big tanks
Just as stated in the heading. I am getting my 360gl tank on tuesday and need to get my heaters. Thanks guys
__________________
Steven - See my tank in my gallery |
#2
|
|||
|
|||
I am using the new visi-therm Stealth heaters. I like 'em
__________________
Goby |
#3
|
|||
|
|||
finnex titanium or any titanium ON A SEPERATE CONTROLLER UNIT
__________________
Smug Egotistical Contemptuous It's difficult to get a man to understand something that his salary requires him not to. |
#4
|
|||
|
|||
Quote:
Ditto, I use a 500 watt to heat mine. I also have another 500 watt for a backup just incase |
#5
|
|||
|
|||
I have read here on RC that Finnex seems to have the best reputation. I use two 200W heaters on my 240 so if one fails, the other will be able to heat the tank and if the thermostat on one stuck on, then it would take longer for a 200W to cook the tank than one 400W.
I use one Finnex and one Won (also Titanium). I like the Won because it has a separate temp sensor that can be placed away from the heater and it also has a bright digital readout of the current tank temp. I rely on my controller display mostly, but it is comforting to see two readouts within a degree or so to know nothing is wacky. -Greg |
#6
|
|||
|
|||
I am seriously considering a Ranco dual temp controller ... one side for the fan for the hood/sump and the other side for the heaters
I have 300W X 2 ebo jagers and they work quite well on a 270G reeftank |
#7
|
|||
|
|||
The best heaters I have ever had are the close loop pumps and my halides LOL.........
__________________
Arguing with ignorant people is an exercise in futility. They will bring you down to their level and once there they will beat you with their overwhelming experience. |
#8
|
|||
|
|||
I have used a ranco single stage controller for over a year now and love it. I have 2 titanium heaters attached to it. It's pretty easy to set and works great. Ranco also makes a dual controller that you may want to look at to control your heaters, chillers, fans........
|
#9
|
|||
|
|||
Ranco's are great!...I wont run a tank without one. Just be careful of those titaniums...I had a won brothers and it stuck on my..got lucky and got it. Its used only for water changes now.
__________________
There is unrest in the reef, There is trouble with the corals, for the lps want more sunlight And the sps ignore their pleas....The trouble with the LPS,(And they're quite convinced they're right) They say the SPS are just too lofty And they grab up all the light. But the SPS can't help their feelings If they like the way they're made. And they wonder why the LPS Can't be happy in their shade..So the LPS formed a union And demanded equal rights. "The SPS are just too greedy;We will make them give us light." Now there's no more SPS oppression, For they passed a noble law, And the Corals are all kept equal By Reefer.. frag.. and saw. |
#10
|
|||
|
|||
Finnex with their controllers. I have 2x500w on my system.
__________________
Laurence Flynn 340g In-Wall Envision Tank and 150g Sump (fuge and grow-out). |
#11
|
|||
|
|||
i have a new in the box finnexx 500 watt if you want to buy 35.00 shipped
|
#12
|
|||
|
|||
I run 3- 300w titanium heaters. One reason I did it this way is just in case one happens to stay on for some reason it would take a lot longer to do any damage as it would only be 300w. I also agree that it needs to be on a seperate controller- either a ranco or something like an aquacontroller. I also have heaters with built in controllers and I just set that temp about 2 degress warmer than my contoller shut off temp just to be safe. Of course being in AZ we only need them for a short period of time and I will be removing them soon and won't have to put them back in till October.
__________________
Scott Last edited by sidewinder770; 05/09/2006 at 11:47 AM. |
#13
|
|||
|
|||
I like to run 3 400 watt heaters set just above my controller. For example my controller is at 80 and my heaters are at 82. That way if the controller stickers they max out at 82, or if a heater breaks I have extra capacity.
__________________
Steve 280 Gallon BB mixed reef PM bullet 3 powered by a PCX-70,400w HQI Radiums,Tunze Wavebox,AC III Litermeter III,PCX-70 pushing 2 Eductors,Geo 624 Ca Reactor,125 sump, Dart Return |
#14
|
|||
|
|||
I dont' use one. temp doesn't drop below 77 by morning. 80 with 2100 watts of halides. thank god for chillers.
|
#15
|
|||
|
|||
I use a Pro-Heat 1000W digital titanium heater.
|
#16
|
|||
|
|||
Here in Europe, we go for Jägger
|
#17
|
|||
|
|||
yeah i have never had problems with my pro heats, running them on all my tanks
__________________
Everyone you meet, knows something you don't. |
#18
|
|||
|
|||
No one uses Aquadyne FirePlug heaters?
__________________
Richard Rendos - Founder WTMRAC It can't rain all the time. |
#19
|
|||
|
|||
Quote:
I found one used that needs some major TLC. But I hope I can refurbish it and use it on my system. If the heating elements are still good, I'll bypass the thermostat and use an external controller. |
#20
|
|||
|
|||
Quote:
WOW a RUSH fan or What lol too cool,,,,,,Sorry didn't mean to interupt,but wow!Been one to since the 2112 era.
__________________
Some day's it ain't worth eating thru the leather straps.... |
|
|