|
|
|
|
#26
04/01/2007, 06:48 PM
|
|||
|
|||
|
What timing, I have a grow out tank that I am setting up with just what you are talking about. The top two header tanks will be filled with LR in one and Macroalgae/SSB in the other. Is this what you are talking about?
Setup: Top tank: 49"L X 9"FTB X 8" deep - Filled with LR Second Tank: Same as top tank- MacroAlgae Third tank: 49"L X 13" FTB X 10" deep- 3-4 sections bottom tank: 49"L X 18" FTB X 12" deep- 2-3 sections A 30 gallon sump with a Lifegaurd Mechanical, Chemical/carbon, & Lifegaurd 600 fluidized sand filter returned by an Iwaki-70RLTZ pressure pump. I was planning on using an ASM G3 skimmer but it seems like you recommend not using one. I was also given an extra tank with the setup that is 60"X13"X10" that I was thinking of using as a remote DSB tank. Any thoughts on what I should skip or add? Here is a pic before I started drilling. The blue is not water or paint, but just the protective wrapper around the acrylic. 
|
|
|
Linear Mode
