|
#176
|
|||
|
|||
That water level is VERY high - it won't take much of anything to splash over the rim. And that includes flow, a fish swimming too quickly near the surface, or even using a cleaning magnet.
Where were the leaks specifically? It looks like there are slits in the overflow, but the water flow was greater than what they could handle. Is that correct?
__________________
Marc Levenson - member of DFWMAS |
#177
|
|||
|
|||
I am gonna be joing your shallow reef club today.... I am picking my tank up from some Repltile show in White PLains,NY from Glasscages. It is a 24x24x16 Starphire Rimless. Your tank looks great, I can't wait to get mine started.
|
#178
|
|||
|
|||
I'm thinking he had the drain closed to find any leaks so it filled all the way up. Either way that over flow is really high. If hair algae or anything stops them up, what a mess.
|
#179
|
|||
|
|||
Hey guys..
Well, that was before i closed a valve to cut down on the pump (Sequence Snapper). Then, by doing that the water level came down to where i was comfortable. Those pics were taken when the pump was working on full blast.. The leaks are VEEEERY minimal. like a drop every 10 seconds. Two are in the Y where the return separates and another one on one of the elbows of a returning bulkhead. So im gonna use PVC cement and silicone to fix them. Going to probably do it on all of the unions just to be safe. Everything else is in perfect condition. I will post some pics of the next water testing...
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#180
|
|||
|
|||
Thank goodness. I thought you meant the tank had some minor leaks. Plumbing is always easy to fix.
__________________
Marc Levenson - member of DFWMAS |
#181
|
|||
|
|||
Marc,
Hehehe...well, my reaction to a tank leak would have been WAAAAY more dramatic..haha Thanks, im just waiting for the plumbing to dry and then ill fix it.
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#182
|
|||
|
|||
That sucks. A new tank that leaks.
Hope you get it taken care of. |
#183
|
|||
|
|||
Quote:
|
#184
|
|||
|
|||
Yeah it was just the plumbing.. i would have ****ed myself if it was the tank..LOL
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#185
|
|||
|
|||
I thought you seemed a little calm to have new tank that was leaking... good to hear it was just the plumbing... can't wait to see the tank stocked...
__________________
Click on my little red house for my 29 gallon SPS tank build... |
#186
|
|||
|
|||
Jester,
LOL..yeah, i would have freaked out if it was the tank. Im gonna make a stop at Lowes today, im gonna re-do that part of the plumbing instead of just patching it... Will keep you posted.
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#187
|
|||
|
|||
If it is on the drain, patching is just fine. But if it is easy and cheap enough to fix, one less thing to worry.
|
#188
|
|||
|
|||
Jay24k,
I decided to take that part of the plumbing off and fixing it. Here are some pics: I also took apart the elbows from the returning bulkheads because the bulkheads weren't standard 1 1/2 in. .. So first i had to buy all these adapters and extra parts that would keep the tank like 8 inches from the wall to make the bulkheads fit into the elbow. Now i decided to silicone the bulkheads straight into the 1 1/2 elbows. They were off by an 8th of an inch or so.. Im sure the silicone will keep them in place and sealed off. BEFORE AFTER
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#189
|
|||
|
|||
that should fix'r up!
|
#190
|
|||
|
|||
I just had some crazy bulkhead sizes on my new drilled tank too... Not sure what to do... Mine are some weird size in between 1 1/4 and 1 1/2"... Hmmmmm...
__________________
Click on my little red house for my 29 gallon SPS tank build... |
#191
|
|||
|
|||
JESTER,
I just siliconed the crap out of them. They wouldn't fit on standard PVC unions...weird weird sizes. Should i do an extra coat of silicone tomorrow? I put some inside the bulkheads and elbows and covered them in the outside too. How long should i let them dry before i leak test again?? Thanks everybody!
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#192
|
|||
|
|||
let it dry for 24hrs
|
#193
|
|||
|
|||
It may work, but I wouldn't sleep well knowing it was done like that.
Are the bulkheads threaded inside the outer section? If they are slip (smooth), I would simply glue in a Street Elbow. It'll look great. The only drawback is if you ever have to take it out, you'll have to remove the bulkhead as well and replace it.
__________________
Marc Levenson - member of DFWMAS |
#194
|
|||
|
|||
Marc,
The bulkheads are threaded in the outside to screw inside a threaded elbow..but the measures aren't compatible. I made sure there was PLENTY of silicone inside and out. Well, the tank wont have to be taken apart unless i move. I dont have any plans to do so any time soon... Maybe ill do another light coat of silicone tomorrow.. I just want it to be as secure as possible. I guess we wont know until i do the leak test..hmpf!
__________________
Shallow SPS Reef In The Works! *Click the Red House for build thread* |
#195
|
|||
|
|||
Get new bulkheads that are threaded/slip at your LFS. Odds are they will let you trade them since they are brand new and simply wrong.
Your set up is so pretty, why let something like this muck it up?
__________________
Marc Levenson - member of DFWMAS |
#196
|
|||
|
|||
I agree wtth Marc. On my tank the bulkheads were threaded inside and out side. I tried doing the same thing as you until I realized that they are meant to have the pipe go inside the bulkhead, not outside. That may mean having to re-plumb that closed loop down to 1" or whatever the inside diameter is, but, I think it'll be worth it not having to worry about the silicone failing.
Dave |
#197
|
|||
|
|||
Both my bulkheads were threaded on the outside and slip on the inside... My return fit perfectly with standard PVC sizes, but the drain was the weird one.... I can slip a standard fitting inside, but the outside threaded side is odd... I'm going to look for a new bulkhead this afternoon, but if not I'll be glueing a slip fitting inside jsut to be safe.... I'd be worried with the silicone to be honest with you. I always seem to have everything go wrong that could go wrong. If you feel like the pipe is supported well and there's no movement at all, you may be ok... jsut be careful not to hit it and cause the silicone hold to weaken over time...
__________________
Click on my little red house for my 29 gallon SPS tank build... |
#198
|
|||
|
|||
The outside threads of a bulkhead do not match plumbing threads. It is only there for the nut to screw on. I do know some fittings in the electrical department may fit them, but all plumbing should be connected to the internal portion of the bulkheads.
When designing a system, you three possible bulkhead choices: 1) Slip / Slip 2) Female Pipe Threads / Slip 3) Slip / Female Pipe Threads My preference is #2 in most cases, and #1 as a back up. I never use #3.
__________________
Marc Levenson - member of DFWMAS |
#199
|
|||
|
|||
I would put new Bulks in it as well.. To much planning for something like that to ponder your mind when your away from the house for any length of time. nice job. How much room do you have from top of the tank to the notches in the overflow? you might be able to take a hand held router and make those slits a little deeper to cover your patooey....
__________________
Kalkwasser in Coffee |
#200
|
|||
|
|||
Not to beat a dead horse, but I will share my personal experience. I had a similar issue with some drains in a previous tank setup. I had purchased the system used and the previous owner had drilled/plumbed it. There was some silicone in a similar fashion as yours with a larger elbow siliconed over the threads of the bilkhead. My thought was "there wont be any pressure on a drain, I'm sure it will be fine"
Wrong... A few weeks after I set up the tank, I noticed tons of salt creep forming in that area and down the back of the tank. Upon closer inspection, the carpet behind the tank was wet. It was slowly leaking. Worst part of the story is that I had to tear the tank down just to get it away from the wall to allow for the repar. When I redid it, I used a street el (sp?) and never had another issue. Sorry for the long post but I hope it helps.
__________________
McLovin for president |
Thread Tools | Search this Thread |
Display Modes | |
|
|