|
#1
|
|||
|
|||
Alk calcium dosing amount
I have been dosing amount of
Randy 2 part recipe #2: 100ml Alk 100ml Cal This has mantained values in my tank at 11.2 DKH (meq/l) and 400 ppm calcium everyday I am in the process of switching over to calcium reactor and waiting for some equipment to come in. I have ran out of homemade 2 part and will use B-Ionic temporarily until my reactor is setup. I have checked the online calculatrs and would just like reassurance, to maintain the values above on a daily basis I would have to dose about 37 ml of part 1 and part 2 b-ionic a day?? Is this correct?? This is assuming that my tank is dropping 5 ppm in calcium and .25 meq/l every 24 hour period. Can someone please confirm I dont want to shock my tank and dose the 100ml of B-ionic which I have been dosing with the homemeade recipe.... Thanks! |
#2
|
|||
|
|||
Are you using the original B-Ionic, or the low pH version? If it's the original formula, 37 ml sounds reasonable. This calculator should help:
http://home.comcast.net/~jdieck1/chem_calc3.html
__________________
Jonathan Bertoni |
#3
|
|||
|
|||
that is the calculator I used but just wanted confirmation from someone. how do I know if it is the old or new version?
|
#4
|
|||
|
|||
It should say "bicarbonate system" on the packaging if it's the new, low-pH version.
__________________
Jonathan Bertoni |
|
|