|
#1
|
|||
|
|||
This thread was automatically split due to performance issues. You can find the rest of the thread here: http://archive.reefcentral.com/forum...0#post10116270
|
#2
|
|||
|
|||
2 should be more than the 'stock' 400 (stock is what... about 850lph?), single-pass or recirculating. 3 might be possible, as long as the water level doesnt have to be adjusted to be too low.
__________________
"If at first, the idea is not absurd, then there is no hope for it" -Al Einstein |
#3
|
|||
|
|||
Yeah, first split
On a side note, is the aquabee a direct replacement for the recirc models as well?
__________________
Your tastebuds can't repel flavor of that magnitude! |
#4
|
|||
|
|||
Right now my skimmer sits in about 8.5 inches of water. I think I am going to drop it and see if it performs better/worse. If I drop it it will be about 13.5 inches of water. Some pumps like the kings perform better in deeper water. So far the Aquabee pump is performing better the more it breaks in.
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#5
|
|||
|
|||
The aquabee 2000 or 2000/1 could be seen as a direct replacement for any of the Aqua Euro pumps on a 1:1 basis, since they are all 590's (actually, rebadged resun pumps). So the Recirc 265 with dual 2000 or 2000/1s would be perfect.
__________________
"If at first, the idea is not absurd, then there is no hope for it" -Al Einstein |
#6
|
|||
|
|||
i dont know if the recirc will hook straight up. you my have to get different unions, or cut the 90 off one of them. the classics will still skim with the water level below the neck. it just pushes the foam up the neck anyway
|
#7
|
|||
|
|||
Hum, Monday and still no phone call about pumps being shipped. About to ship the skimmer back. IMO I won't buy another thing from Aqua Euro. The Reef Nut was AWESOME and a TON of Help, Aqua Euro just lost a customer, I was actually thinking about buying there large calcium reactor but I will get a GEO, something I know that will work and not have to worry about it... Anyone get there replacement pumps yet???
__________________
I have some LE Super RARE Whisker Sunburst Brown Aptasia FS!!! Give me a flipping break people... Corals now days need to come with a birth cert. with a name on it... |
#8
|
|||
|
|||
Still none here, not very happy.
|
#9
|
|||
|
|||
maybe they are sending us all aquabees as replacements and they are just finishing up the "deal">)
|
#10
|
|||
|
|||
I highly doubt they are sending aquabees.
I'm thinking IF the re-tooling was completed and they got the pumps done in the Honya factory, they are sitting in a container waiting customs or something.
__________________
If your best friend calls you up and tells you they have crabs and you respond with "are they reef safe".... You might be a reefneck! |
#11
|
|||
|
|||
I was joking
|
#12
|
|||
|
|||
Hum, just got home and nothing... Looks like I am going to be making a phone call tomorrow. It is to the point that we need to be compensated in my mind. I was told that I would have my pumps by today since they were "worse case scenario" going to be in this past Thurs but they would call when they arrived. I think aqua euro needs to send us a voucher for some diff pumps and have then overnighted, I am tired of this BS.
__________________
I have some LE Super RARE Whisker Sunburst Brown Aptasia FS!!! Give me a flipping break people... Corals now days need to come with a birth cert. with a name on it... |
#13
|
|||
|
|||
im not happy, but its not that serious imo. as long as we could identify the problem, and rig the pumps to be safe for the time being so we are not skimmerless, im happy to give them some more time to work this problem out in hopes they will use different pumps. i dont really want king 590 pumps. i wish they would give some kind of option on this. like you can get the 590's, or octo pumps, or 2 aquabees, or even just them give us vouchers for so much towards new pumps.. something other than the 590.
to be honest. im in no real rush to get them, because when they come, my skimmer wont perform as well as it is now if i change em, and if i dont.. then i just have 3 pumps for nothing. |
#14
|
|||
|
|||
Well I just modded my aquabee2001 on my AE 135 classic. At this point I wish I had a dwyer meter. Stock these things should pull 480-500lph. I just stacked the mesh on top of the needles and I think I am getting more than 600lph. Right now the neck can't seem to handle it. I am going to keep it on until it breaks in. Here are some pics.
The last one shows how the pump just slips on to the AE elbow. I will post later with shots of the skimate.
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#15
|
|||
|
|||
I just cleaned the cup out before the mod and a good frothy foam was created instantly. In order to get finer bubbles I did end up putting a valve on the air intake. I may also have to shorten the return pipe to allow less turbulance in the neck. 3 of the aquabees mesh mod might be over kill on a 400
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#16
|
|||
|
|||
Quote:
with the aquabee it almost looks like a bm neck full of air.. thats how mune does when i have it wide open. |
#17
|
|||
|
|||
Looks awesome Jeremy.
__________________
Mike Sandbeds operate like wormholes and the excess nutrients and detritus are transported to a sister galaxy - Bomber 12-7-41 & 9-11-01 Never Forget! |
#18
|
|||
|
|||
Here's someone selling the Aquabee pump for $90: http://archive.reefcentral.com/forum...readid=1037375
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#19
|
|||
|
|||
Quote:
|
#20
|
|||
|
|||
Well, don't feel to bad, i poped off the back of my genx2400 and its exactly the same as all yours.....i wasn't using it, which was good, but i have to contact pacific coast imports and get it taken care of, which i seriously doubt happens.
__________________
There's no such thing as a normal reef, there's just reef |
#21
|
|||
|
|||
I pulled my pumps back out after gooping a TON of silicone on them the other week and they are once again rusting. I even prepared the area so the silicone had a clean surface to stick to and I know I covered every square inch, no doubt in my mind, I used almost a whole large tube of aquarium silicone (One that fits in a caulking gun). So here is the scenario, what happens if we start to loose livestock? I pulled the skimmer out of my sump since the pumps are rusting again. I'm sorry but I purchashed an Aqua Euro Skimmer which on there website indicates come with epoxy incased pumps... Paid for something I did not get and we are all still waiting on new pumps that were suppose to ship almost a week ago. Aqua Euro needs to give us a voucher to purchase new diff. pumps and they foot the bill. I just find it real funny that Aqua Euro has not commented in this thread for quite some time now...
__________________
I have some LE Super RARE Whisker Sunburst Brown Aptasia FS!!! Give me a flipping break people... Corals now days need to come with a birth cert. with a name on it... |
#22
|
|||
|
|||
The turn around on these pumps are taking longer than expected. I feel actions should be made on getting new pumps for the current AE customers, like the ones in this thread. They should have took the loss right away and replaced the pumps with octos or something.
I can't honestly say I can recommend these skimmers anymore, especially if they stay with the King pumps.
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
#23
|
|||
|
|||
I have to agree, no pumps for some time, and possible livestock issues in the meantime, not a good scenario. Aquaeuro should pick of the ball and start sending other pumps ASAP, none of us want's a king590 again, fixed or not! I guess I can not recommend them anymore either, unless something impressive is done soon. Great skimmer bodies, but way too much hassle otherwise. If anyone from Aquaeuro reads these posts QUICKLY make this right, if not your best customers, happy reefers who like the equipment, will quickly become your worst nightmare, UNHAPPY reefers who do not like your equipment, that post a lot on reefer boards
|
#24
|
|||
|
|||
I think I might have to move down to New Mex and show them how to build a skimmer down there...lol.
On a related note. There are aquabees being used on Chinese skimmers (www.reef-free.com), so they are either cheap enough to buy, or there are clones out there. Could be an option for AE. Otherwise, perhaps to seperate themselves from the competition (Octopus), there is the Aqua-Excel company with their 'black BK'... that would roll some heads...
__________________
"If at first, the idea is not absurd, then there is no hope for it" -Al Einstein |
#25
|
|||
|
|||
Hey Hahn, I just thank you again for the recommendation on the AquaBee pump. I can't wait to go home and see whats in my collection cup.
__________________
180 Gal Reefready, 75 gal Sump/Fuge, Reeflo 200 skimmer, 3 250 Reeflux Bulbs in Lumen Bright reflectors powered by coralvue electronic ballasts, PM Kalk reactor, 2 Vortechs, Geo 618 calcium reactor |
Thread Tools | Search this Thread |
Display Modes | |
|
|