[QUOTE]
Originally posted by FlamesFan
[B]I just found this thread while sifting through this part of the forum so I'll also post this in here:
In the manual it says to
"Be sure to trim or adjust the position of the outlet pipe (#4) so that the bottom where the water exits is ABOVE THE WATER LEVEL, if it is below the water, it will cause the skimmer to surge and make a gurgling sound in the vent pipe. It will also make the skimmer difficult to adjust".
You need to build A PVC stand so the water level is just above the intake 90. My outflow pipe is 1in under the water. I have not had any problems with flow or adjustments. I would buid a stand first, and see how that works for you. No need to glue the PVC parts.