but the nitrites are up right now to 1-2 ppm, with a drip/sec.
its going to fast slow it down.
How do you calculate the gph rating?
this time experience, otherwise dificult math
I haven't added anything up, but does a drop/sec = 8gph or 8gpd.
nope
I read on reeflougne.com that once a DIY coil deni has cycled, you can open the valve up for free flow of water. I was always under the impression that it had to stay roughly a drip/sec or a little faster (steady drip, but still a drip), but not full flow. This wasn't correct was it?
free flow is such a complicated thing, but yes that is correct as it cycles you should be slowly speeding it up, until its going quite fast. using gravity alone you probibly wont get 100% effieicncy, as you can often push the water just a bit faster, but to get 100% or anywhere near there takes more work settling for 80% by using gravity and just "opening it up" is a nice comprimise. also the
once a DIY coil deni has cycled it should be as the CD is cycling
a few gliders and electrics all using a Futaba 9C radio
cool im using a few radios my flash 5 is my current fav, i have a futaba 6something 50mhz but its older and lacks some of the features.