ok, im not sure if the picture will be ledgible enought to read, but here it is...
well im not quite sure if there will be enough room to have the mag7 used externally, as i havent gotten the sump tank yet. there are a few things missing in the drawings, andits not to scale. this is the description in order going from the sump, up to the display. keep in mind that the SCWD is a tee, and every thnig after that is x2.
we start out with a 3/4" bulkhead and strainer to exit the sump. 3/4" rigid pipe-
union ball valve-
3/4" rigid pipe-
3/4" female adapter-
return pump-
3/4" female adapter-
3/4" rigid pipe-
union check valve-
3/4" rigid pipe-
3/4" female adapter-
3/4" x 3/4"male threaded hose barb-
3/4" vinyl tube-
SCWD-
3/4" vinyl tube-
3/4" x 3/4" male threaded hose barb-
union ball valve-
3/4" rigid pipe-
and enters the display through a 3/4" bulkhead.