|
44" head pressure + I am running 4 feet horizontally to feed the return at the far end of the tank (call it return #3). Was going to put the return pump directly below the overflow so it is a straight shot upward to the two returns in the overflow box (return #1 & #2)
I had purchased a mag 12, but in all the reading on reefcentral planning to exchange for a eheim 1262. With only 900 gph on the eheim, was also considering adding a second small pump to provide return to the 3/4" return at the far end?
Was hoping to plumb with all with pvc with a minimal amount of flex hose, tube, etc.
Like everyone, one of my biggest considerations is noise.
On the drain I was going to connect both 1" drains (probably durso design) together to a 1-1/2". Have two outlets off the 1-1/2", one to the skimmer section (middle of sump) and one two the fuge (far end of sump). Plan was to be able to slow down the flow to the fuge based on what I've read, slow flow=good fuge?
|